-
Safety matters for the constant temperature and humidity test chamber can be programmed
Time of Update: 2022-09-15
1. The constant temperature and humidity test chamber must be grounded when the box shell is installed, and the ungrounded may cause the risk of electric shock once the leakage of electricity.
-
Carton drop tester - technical literature
Time of Update: 2022-09-15
Technical parameters Drop height 300mm-1500mm (other sizes can be customized) Specimen maximum weight 65Kg Specimen maximum size 800mm(L)×800mm(W)×800mm(H) Impact panel size 1700mm(L)×1200mm(W)×14mm(H) Drop error ±10mm Drop plane error <2° Test bench dimensions 1700mm(L)×1200mm(W) × 2300mm(H) Weight 260Kg Ambient Temperature 15-35°C Relative Humidity 70%, Non-Condensing Working Power Supply 380V 50Hz Carton Drop Tester - Technical LiteratureCarton drop tester - technical literature packaging drop test machine is suitable for the impact strength test of the package product.
-
Karl Fischer Moisture Meter – a solvent moisture meter with high sensitivity @ 2022 has been updated
Time of Update: 2022-09-15
Karl Fischer moisture meter - a high sensitivity solvent moisture meter @2022 has been updated Karl Fischer moisture meter - a highly sensitive solvent moisture meter @ 2022 has been updated[HM-WS2] K
-
Conical conical joint connection strength tester Speed ratio: 1:100000 Shanghai Huitao
Time of Update: 2022-09-15
Dimensions: 520 (L) X 460 (W) X 680 (H) MM four, software functions: 1, parameter setting, specimen number, range, speed, standard, batch, temperature, humidity and other parameters can be set by themselves, and stored in the test report 2, the test process can dynamically display the curve in real time, according to user needs to choose strong force ~ elongation, strong force ~ elongation, strong force ~ time, elongation ~ time and other curves.
-
Combined oscillation incubator maintenance
Time of Update: 2022-09-15
Combined oscillation incubator maintenance 1, the compressor should avoid continuous starting 2, the bearing of the transmission part has been filled with an appropriate amount of grease before leaving the factory, the instrument should be filled with grease every six months during continuous operation, and the filling amount accounts for about 1/3 of the bearing space.
-
In the fall of this beautiful flower season, the Superb HD UV Imager travels with you
Time of Update: 2022-09-15
Xiaocheng relies on diligence, Zhongcheng relies on wisdom, and Dacheng relies on virtue, and eventually becomes the Tao. Diligence can keep warm, and diligence is the basic quality of people. If peop
-
Near-infrared Rapeseed Analyzer – An accurate rapeseed detector @2022 has been updated
Time of Update: 2022-09-15
Near-infrared rapeseed analyzer - a precise rapeseed detector @2022 has been updated Близько інфрачервоного аналізатора гвалтування - оновлено детектор гвалтdвання з точним виявленням @ 2022 if necess
-
A generation of superstars fell in honor of RNA pioneer Professor Christine Guthrie
Time of Update: 2022-09-15
During her career at the University of California, San Francisco (UCSF), she established the basic concepts of the field of pre-mRNA splicing, which had a significant impact on the process of removing introns to produce mature mRNA.
-
Cardboard Interlayer Peel Tester - Technical Literature
Time of Update: 2022-09-15
Cardboard interlayer peel tester - technical literature Interlayer bond strength refers to the ability of paper or cardboard to resist interlayer separation, which is a reflection of the internal bond
-
What is the technical principle of powder filling machine?
Time of Update: 2022-09-15
Powder filling machine introduction: Powder filling machine is our company's self-service research and development of specially for bottled powder filling machine, the use of disc positioning type fil
-
The protective effect of Sargassum on UVB-induced photodamage was evaluated by L929 cells and zebrafish models
Time of Update: 2022-09-15
Results: The total polyphenol content of STPE was 72%, stPE reduced the ROS content in L929 cells, increased SOD and CAT activity, and significantly reduced MDA content, thereby effectively alleviating UVB radiation-induced oxidative damage.
-
Why is the price of high and low temperature test chamber higher than that of oven
Time of Update: 2022-09-15
1, high and low temperature test chamber is more difficult than the oven technology 2, on the surface, there is not much difference between the two. The practical difficulty is that when the air is he
-
How is the heat transfer oil secondary circulation system temperature controlled?
Time of Update: 2022-09-15
Thermal oil secondary circulation system is a laboratory instrument and equipment with rapid cooling and heating function at the same time, Wuxi Guanya thermal oil secondary circulation system uses a
-
How to maintain the gynecological gel filling machine
Time of Update: 2022-09-15
1. Observe the moisture filter and oil mist device of the pneumatic combination of the two parts before work, if there is too much water accumulation, it should be eliminated in time, and the oil surface should be refueled in time; 2.
-
Lizhu and CanSino enhanced needles have been approved for emergency use, and the battle for the "upgraded" vaccine has arrived?
Time of Update: 2022-09-15
Following V-01, on September 4, another vaccine research and development company, CanSino, also announced that its inhaled recombinant novel coronavirus vaccine (adenovirus vector type 5) (Ad5-nCoV for inhalation) was included in the sequence of emergency use of boosted immunization, becoming the first inhaled COVID-19 vaccine approved by China.
-
Weight loss can also easily "lie to win"? In the analysis of weight loss therapy in research, three positive trends were glimpsed
Time of Update: 2022-09-15
The proportion of single GLP-1 receptor agonists in early clinical development of therapies gradually decreases In addition to the targets of enterointropic insulin, from the market to the phase 2 stage, the therapy has generally shown a trend of more diversified and novel targets.
-
Floor-standing high-speed centrifuge imbalance error, how to solve
Time of Update: 2022-09-15
After stopping the high-speed centrifuge, first carefully check that the tubes or plates in the rotor or bucket are properly balanced.
After stopping the high-speed centrifuge, first carefully check that the tubes or plates in the rotor or bucket are properly balanced.
-
Use Turbiscan to study the gelation phenomenon of cosmetic emulsions
Time of Update: 2022-09-15
Introduction to gel acquisition is mainly through two mechanisms: the creation of a network structure (e. g. , gelatin) by a mesh of polymers, or the formation of a network structure (e. g. , yogurt)
-
Precautions for flipping oscillators in operation
Time of Update: 2022-09-15
4. It is strictly forbidden to move the machine during normal work.
4. It is strictly forbidden to move the machine during normal work.
4. It is strictly forbidden to move the machine during normal work.
-
The biomedical industry chain is setting off a wave of IPOs, and unique technologies and platforms are the core driving force
Time of Update: 2022-09-15
In recent days, the heat of biomedical industry chain enterprises in the capital market can not be described as not high. On September 1, BIOSET was listed on the main board of the Hong Kong Stock Ex
