Carton drop tester - technical literature

Carton drop tester - technical literature packaging drop test machine is suitable for the impact strength test
of the package product.

It is to simulate the damage of packaged products when they are dropped during transportation and loading and unloading, and to evaluate the impact resistance strength of the packaging and the rationality of
the packaging design.

Through the free drop of the transport packaging vertical impact test, you can freely select the surface, edge, angle three states of the fall test in advance, the drop height can be preset, when the test piece rises to the preset height can be automatically positioned, the drop height can be adjusted
.

Equipment composition 1.
The impact table is horizontal plane, does not move during the test, does not deform, and meets the following requirements: a.
for the whole object, the mass is at least 50 times the mass of the test sample; 2.
Lifting device: During the lifting or descending process, the test sample
should not be damaged.

3.
Support device: The device supporting the test sample should be able to put the test sample in the required predetermined state
before release.

4.
Release device: During the release of the test sample drop process, the test sample should not touch any part of the device to ensure its free drop
.

Technical parameters Drop height 300mm-1500mm (other sizes can be customized) Specimen maximum weight 65Kg Specimen maximum size 800mm(L)×800mm(W)×800mm(H) Impact panel size 1700mm(L)×1200mm(W)×14mm(H) Drop error ±10mm Drop plane error <2° Test bench dimensions 1700mm(L)×1200mm(W) × 2300mm(H) Weight 260Kg Ambient Temperature 15-35°C Relative Humidity 70%, Non-Condensing Working Power Supply 380V 50Hz Carton Drop Tester - Technical Literature