-
What are the characteristics of the big honey pill machine
Time of Update: 2022-09-08
The principle of the big honey pill making machine: the soft material of the medicine made by the medicine refining machine is extruded and extruded into the medicine strips of the required specifications, and is guided into the pill making knife wheel through the conveying bar.
-
High quality pet food freeze-drying equipment - characteristics of pet food freeze dryer
Time of Update: 2022-09-08
In the sublimation drying process, it is necessary to strictly control the eutectic point and co-melting point temperature requirements of pet food materials, and when using the radiant pet food freeze dryer, it is impossible to meet the sublimation drying at the eutectic point temperature, which leads to sublimation and drying at too fast or too high a temperature to affect the quality of lyophilized samples, and there is collapse, deformation, discoloration and the phenomenon of unable to rehydrate.
-
Application of RG-3000Z Building Glass Shading Coefficient Measuring Instrument
Time of Update: 2022-09-08
002A/hr@500nm, 0A Working mode: transparent Transmittance, reflectivity, spectral energy, absorbance Grating: 1200L/mm (UV/Vis) 300L/mm (Nir) Measurement method: transmission, reflection Receiver: PMT, PbS Dimensions: 550*450*240mmRG-3000Z architectural glass shading coefficient tester is applicable to the standard GB/T2680-2021 "Determination of architectural glass visible light, direct sunlight transmittance, total solar transmittance, ultraviolet transmittance and related window glass parameters", which is specially used for the detection of architectural glass shading coefficient.
-
Torque tester used
Time of Update: 2022-09-08
4. When the instrument is tested for the first time, if the buzzer emits a continuous short "beep" alarm, which cannot be used normally, the sensor may have caused permanent (separator) long-term damage or zero drift is too large, please turn off the power of the instrument and call the after-sales service personnel in time!
-
Introduction to the torsional performance test method of medical metal bone screws
Time of Update: 2022-09-08
4. The whole process has no gear to display torque and peak, and the smaller resolution can be set according to needs, and can be automatically calibrated and verified.
-
Bunsen Details: PCR single tube flat cover eight rows of tubes
Time of Update: 2022-09-08
Bunsen detailed explanation: PCR single tube flat cover eight row pipe, our company is composed of industry background and rich market experience of the industry, to provide products for the life science research field, for the majority of scientific research workers to provide services.
-
PCR tube PCR single tube product features and uses
Time of Update: 2022-09-08
Product description: The PCR tubes provided by Tianjin Bunsen are made of specially formulated polypropylene material.
Product description: The PCR tubes provided by Tianjin Bunsen are made of specially formulated polypropylene material.
Product description: The PCR tubes provided by Tianjin Bunsen are made of specially formulated polypropylene material.
-
【Full text translation】 FDA's fiscal 2021 drug quality status report
Time of Update: 2022-09-08
The FDA has made progress in two initiatives (NIPP and QMM) that are building better tools to characterize the quality of drug manufacturing sites.
The FDA has made progress in two initiatives (NIPP and QMM) that are building better tools to characterize the quality of drug manufacturing sites.
-
What are the characteristics of glass reactor
Time of Update: 2022-09-08
The interlayer of the kettle is injected with a constant temperature (high temperature or low temperature) hot solution or cooling liquid to heat or cool the materials in the reactor at a constant temperature, and can provide stirring .
-
Maintenance method of mold incubator
Time of Update: 2022-09-08
6. To do a good job in the daily maintenance of the incubator, the use and maintenance should be carried out by full-time personnel, and the power supply should be cut off during maintenance to ensure safety .
-
What is the difference between primary reverse osmosis and secondary reverse osmosis used in purified water equipment
Time of Update: 2022-09-08
It can be seen that the use of two-stage reverse osmosis is equivalent to further removing ions in the water to ensure the quality of the effluent .
-
The next PD-1 for "dystocia"
Time of Update: 2022-09-08
In the face of attractive prospects, the expectations of innovative pharmaceutical companies around the world for tumor immunotherapy are getting higher and higher, and entrants are flocking to find the next PD-1.
-
The capital cycle is downward, and China's innovative drugs are upward
Time of Update: 2022-09-08
Since 2015, we have experienced the first wave of innovative drug boom, and thousands of sails have competed. Although this is only a victory for the Fast Follow strategy, it is difficult to sustain.
-
How to Use Soybean Protein Meter-Hengmei Near Infrared Soy Protein Determination
Time of Update: 2022-09-08
Main technical indicators of the instrument: Application field: soybean industry detection indicators: protein, moisture, fat, water-soluble protein Application scenarios: acquisition, storage, processing Detection scenarios: indoor, vehicle detection Hengmei soybean protein instrument technical parameters: Testing samples: soybean Detection methods: Grating transmission weight: less than 7kg Display: capacitive touch screen Operating temperature: -10℃~40℃ Battery: Removable lithium battery Instrument size: 210mmX293mmX228mmApplication method of Soybean Protein Analyzer - Hengmei near infrared soybean protein determination Comprehensive technology enterprise .
-
Role and efficacy of dimethyl sulfoxide DMSO Uses
Time of Update: 2022-09-08
The harm of dimethyl sulfoxide to the human body DMSO is less toxic, has permeability to human skin, and has a harmful effect on the eyes.
The harm of dimethyl sulfoxide to the human body DMSO is less toxic, has permeability to human skin, and has a harmful effect on the eyes.
-
Some working principles and characteristics of ultrasonic bottle washing machine
Time of Update: 2022-09-08
The action of each function of this machine is controlled by PLC program, the air source is purified compressed air, the water for rinsing in the bottle is water for injection, and the water for initial washing of outer wall and ultrasonic wave is circulating water .
-
The status of the "bellwether" of the industry is prominent! Research on listed biomedical enterprises in four economically strong provinces
Time of Update: 2022-09-08
The biomedical industry is one of the key areas of advanced manufacturing clusters, which is not only an important engine for economic growth driven by developed countries, but also a key area for in
-
Matters needing attention in high-purity nitrogen generators in chromatographic experiments
Time of Update: 2022-09-08
It is worth reminding that the nitrogen generator can only collect air as a gas source in the laboratory or in a very close position outside the laboratory, and the air in the laboratory is often polluted, and the organic solvent content in it is due to the pretreatment process of the experiment.
-
Which cooling method is good for high and low temperature humid heat test chambers?
Time of Update: 2022-09-08
There are two main types of cooling methods for high and low temperature humidity and heat test chambers: air cooling or water cooling Air cooling is mainly the use of air flow to generate heat convection, thereby reducing the temperature in the box to achieve the purpose of cooling.
-
The high and low temperature damp heat test chamber has three working capabilities
Time of Update: 2022-09-08
The high and low temperature damp heat test box is based on the hot output of the intermediate relay on one side, and on the other hand, according to the cooling cycle system of the refrigeration compressor.
