-
Medical wastewater residual chlorine on-line analyzer
Time of Update: 2022-10-02
Product Introduction YLG-2058X residual chlorine online analyzer is our medical wastewater, sewage and other scenarios developed water quality online monitor, the residual chlorine value of aqueous so
-
Medicinal grade potassium hydroxide cas1310-58-3 use
Time of Update: 2022-10-02
[use three] Used as analytical reagents, saponification reagents, carbon dioxide and moisture absorbents, but also used in the pharmaceutical industry [use four] mainly used as raw materials for potassium salt production, such as potassium permanganate, potassium carbonate, etc.
-
Technical analysis of the application of intelligent energy consumption system of large buildings
Time of Update: 2022-10-02
Gateway layer: The gateway layer is mainly through the use of intelligent gateway (recommended by our ANet series), the main role of the intelligent gateway is to collect meter data through RS485 bus and a variety of communication protocols, and transmit data to energy consumption cloud services through the power consumption protocol through the protocol conversion function of the gateway.
-
Application characteristics of activated carbon deep film stack filter element
Time of Update: 2022-10-02
Activated carbon deep film stack is a kind of deep filter paperboard as the filter material, through mechanical interception, activated carbon adsorption, electrostatic adsorption and other modes of action to effectively remove impurities and microorganisms in the liquid.
-
The structure of the biochemical analyzer takes you to know it
Time of Update: 2022-10-02
Biochemical analyzers, often referred to as biochemical instruments, are instruments that use the principle of photoelectric colorimetry to measure a specific chemical composition in body fluids.
Biochemical analyzers, often referred to as biochemical instruments, are instruments that use the principle of photoelectric colorimetry to measure a specific chemical composition in body fluids.
-
Piezoelectric Rain Monitoring Station – A well-known rain monitoring device #2022 has been updated
Time of Update: 2022-10-02
ABS material protection box, corrosion resistant , anti-oxidation, waterproof grade IP66Piezoelectric Rainfall Monitoring Station - A well-known rain monitoring device #2022 has been updated [FT-YJ2] పైజోఎలెక్ట్రిక్ రెయిన్ మానిటరింగ్ స్టేషన్ Piezoelectric rainfall monitoring station is a modern type of rainwater station based on the Internet of Things, consisting of piezoelectric rainfall sensors, collectors, solar power supply systems, pole brackets, etc.
-
Medical grade maltodextrin experiment application for research and development test
Time of Update: 2022-10-02
【Identification】Take about 1g of this product, add 10ml of water to dissolve, slowly drop into the alkaline copper tartrate test solution, heat, that is, generate red precipitation.
-
Probiotic lyophilization process development How to choose a laboratory lyophilizer
Time of Update: 2022-10-02
In order to better develop probiotics to occupy the market, domestic and foreign probiotic enterprises should increase scientific research investment, develop more strains with independent intellectual property rights, probiotic lyophilizer is a must use vacuum freeze-drying equipment, how to choose a laboratory lyophilizer when the lyophilization process research and development of biotics is a problem for some enterprises.
-
What are the characteristics of a walk-in plant growth box?
Time of Update: 2022-10-02
Height adjustable horizontal light box, sample shelf, suitable for different height of incubated objects; 7.
Height adjustable horizontal light box, sample shelf, suitable for different height of incubated objects; 7.
Height adjustable horizontal light box, sample shelf, suitable for different height of incubated objects; 7.
-
Briefly describe the common classifications of density meters
Time of Update: 2022-10-02
The basic principle of density meter measurement is to measure the degree of blackness after exposure and development of photosensitive materials, that is, blackness.
The basic principle of density meter measurement is to measure the degree of blackness after exposure and development of photosensitive materials, that is, blackness.
-
Four characteristics of laboratory small spray dryers
Time of Update: 2022-10-02
Practice has proved that in contemporary times, spray drying is an important industrial drying operation.
Practice has proved that in contemporary times, spray drying is an important industrial drying operation.
Practice has proved that in contemporary times, spray drying is an important industrial drying operation.
-
Mold incubator MJ-I series box structure and working principle
Time of Update: 2022-10-02
MJ series mold incubator is composed of five main parts: box, temperature control system, high and low temperature conversion system, gas circulation system and lighting system.
MJ series mold incubator is composed of five main parts: box, temperature control system, high and low temperature conversion system, gas circulation system and lighting system.
-
How to control the inlet and outlet air temperature of spray drying equipment?
Time of Update: 2022-10-02
2. In the operation of spray drying equipment, the hot air temperature will affect the bulk density of the product.
2. In the operation of spray drying equipment, the hot air temperature will affect the bulk density of the product.
-
How to use the surface tension to determine whether the paper towel is "clean"?
Time of Update: 2022-10-02
Compared with other paper towels, the surface tension value of No. 4 extractive facial tissue is low, indicating that the additive content in the paper towel is high and the cleanliness of the tissue is poor.
-
FDA updates the Pharmaceutical Manufacturing Inspection Compliance Manual with remote assessments and examples of advanced quality system indicators
Time of Update: 2022-10-02
On September 16, the U. S. FDA published two Important Compliance Program Manuals (CPGMs) for pharmaceutical production inspections and pre-approval inspections. The revision is significant, mainly d
-
OEB3 wet granulation line
Time of Update: 2022-10-02
Wet granulator in the production process, because the mixing spindle and granulation shaft of the air sealing mechanism needs to continuously enter the cylinder body compressed air, even if there is a filter can relieve pressure, the cylinder will still be in a state of relative positive pressure, resulting in an increased risk of material exposure.
-
Application of fire emergency lighting and evacuation indication system in a pharmaceutical plant project
Time of Update: 2022-10-02
In order to ensure that the equipment is in a normal state when the fire occurs, can work normally, the implementation of rapid and reasonable emergency evacuation system, centralized control type emergency lighting and evacuation indication system came into being, can accurately realize the real-time monitoring and control of each emergency lamp, daily 24-hour management and maintenance, to ensure that the system operates normally, in the event of a fire accurately and quickly guide personnel to the safe area.
-
How are samples from general test kits handled?
Time of Update: 2022-10-02
For example, suitable for testing specimens including serum, plasma, urine, thoracoascites, lavage fluid, cerebrospinal fluid, cell culture supernatant, tissue homogenate, etc.
For example, suitable for testing specimens including serum, plasma, urine, thoracoascites, lavage fluid, cerebrospinal fluid, cell culture supernatant, tissue homogenate, etc.
-
What is the effect of humidity on a walk-in high and low temperature test system
Time of Update: 2022-10-02
The humidity is high, which reduces the insulation strength of the electrical equipment of the laboratory test system, and the moisture in the air adheres to the surface of the insulation material, forming condensation, reducing the insulation resistance of the electrical equipment, greatly increasing the leakage current of the equipment, causing insulation breakdown, and the leakage inside the switchgear causes creepage and accidents, resulting in electrical faults.
-
Briefly describe the maintenance method of laser scattering particle size distributor
Time of Update: 2022-10-02
First of all, the laser tube is not able to work normally and can produce light; Secondly, whether the optical path is polarized or not, it can be obscured in front of the sample window, and after the approximate circle is normal, the light can not come out from the green detector on the right hand side of the frontal instrument, and the light is almost circular as normal.
