-
Polypropylene (PP) pellets: futures are changing, what is the short-term trend of PP?
Time of Update: 2022-08-25
After a few days, the market has entered a fall mode due to the impact of downstream resistance to high prices and the fall of futures Since the beginning of November, polypropylene has been pulled up by the high futures and has risen continuously, but the good times are not long.
-
KRAIBURG TPE's innovative THERMOLAST® K-Series TPE for dynamic diving equipment
Time of Update: 2022-08-25
Versatility solutions for superior overall designKRAIBURG TPE®'s innovative TPE compounds provide consistent colorability, excellent mechanical properties to meet the custom requirements of product designers and developers, while allowing the finished product to have an excellent professional fit, comfort degree, soft touch and appearance, which are recognized by end users .
-
Huntsman's third-quarter operating income was $1.51 billion
Time of Update: 2022-08-25
Adjusted EBITDA for the segment increased primarily due to lower raw material and fixed costs and higher volumes from the acquisition of Icynene-Lapolla, partially offset by lower MDI polyurethane prices .
-
Trinseo opens new TPE pilot plant in Hsinchu, Taiwan
Time of Update: 2022-08-25
"The pilot plant provides a potential platform "We are very excited to launch our pilot plant for custom engineered TPEs and TPUs, closer to our customers in the Asia Pacific region," said Francesca Reverberi, vice president of engineered materials and synthetic rubber at Trinseo.
-
Volkswagen invests in 3D printing to enhance car designs
Time of Update: 2022-08-25
Following the installation of two Stratasys J850 3D printers based on PolyJet technology, the Volkswagen Pre-Series-Center will 3D print a number of hyper-realistic prototypes for interior and exterior applications, helping the company drive further innovation in new car designs .
-
Tianjin Bohua DMTO plant with an annual output of 1.8 million tons is handed over!
Time of Update: 2022-08-25
8 million tons/year methanol-to-olefins plant has been handed over, which is the second large-scale MTO plant newly built this year●The 12th Coal-to-Olefin and High-end Chemicals Forum will be held in Yinchuan, Ningxia on October 20-21.
-
Google increases its efforts in sustainable development!
Time of Update: 2022-08-25
Incorporating recycled materials into hardware product designs not only supports the company's commitment to sustainability, but also allows supply chain partners to confidently invest and develop these types of materials so they can be more widely used in the consumer electronics industry, Google said.
-
Ukraine's PVC imports fell by 24% from January to September, exports increased by 4%
Time of Update: 2022-08-25
According to MRC's DataScope report, Ukraine's polyvinyl chloride (PVC) imports fell 24% year-on-year in the first nine months of 2020 to 26,800 tonnes According to MRC's DataScope report, Ukraine's polyvinyl chloride (PVC) imports fell 24% year-on-year in the first nine months of 2020 to 26,800 tonnes .
-
incredible!
Time of Update: 2022-08-25
In March this year, LG Chem Poland's wholly-owned subsidiary and the European Investment Bank (EIB) reached a loan agreement of 480 million euros to expand the production capacity of LG Chem's Poland plant With the growing trend of electric vehicles, LG Chem continues to deploy in this field.
-
KraussMaffei presents the new RimStar intelligent mixer
Time of Update: 2022-08-25
. This smart machine features a new operating concept with a mobile control panel, an intuitive user interface and an added touch panel on the mixing head .
-
Aggregate MDI: But the pity is repeated, the audience is melancholy
Time of Update: 2022-08-25
After the weekend fermentation, it rushed to 19,000 yuan/ton on Monday in one fell swoop After the factory's new moon price was announced high at the weekend, it temporarily stopped the bearish atmosphere in the market.
-
New discovery!
Time of Update: 2022-08-25
Silica-1 (TS-1) was developed nearly 40 years ago and has been successfully used as a catalyst to convert propylene to propylene oxide, an important commodity chemical such as for the production of polyurethanes, etc.
-
Hongtuo Instrument: Innovation and intelligent manufacturing, customer first, providing instrument solutions for plastic enterprises
Time of Update: 2022-08-25
At this plastic expo, Hongtuo Instruments brought several routine and necessary testing instruments in the plastics industry, among which the melt flow rate meter, tensile and flexural strength tester, thermal deformation and Vicat softening point are widely concerned.
-
Maoming Petrochemical: The monthly output of high-melting and high-permeability polypropylene resin hits a record high
Time of Update: 2022-08-25
The equipment engineer Chen Mingdong formulated a special care inspection plan for key equipment , Track and check the temperature of the front bearing until the temperature gradually drops to normal and the device resumes smooth operation The squad leader Wen Jianxiong immediately contacted the electrical personnel to grease the front bearing of the main motor.
-
Aggregate MDI: The first hammer of the New Year's bell
Time of Update: 2022-08-25
There are still about 30 hours left for November 2020 to end. Compared with the previous October, this November is a little less ambitious. It ended the 3-month upward market by itself, and the high p
-
Wanhua Chemical's first LLDPE vehicle was delivered to customers, and the full-scale production of 1 million tons/year large-scale ethylene has kicked off
Time of Update: 2022-08-25
The two parties took a group photo At 13:30 on October 29th, a car with a big red flower on its head and a banner with "Warmly Celebrate the smooth delivery of Wanhua Chemical's first LLDPE car" arrived at the Wanma Polymer Plant.
-
The first hoisting of the radiation chamber of Guangdong Petrochemical's largest ethylene cracking furnace in China
Time of Update: 2022-08-25
2 million t/a ethylene plant, which was constructed by PetroChina Sixth Construction Company, was hoisted into place at one time, marking the entry of Guangdong Petrochemical's ethylene plant into the installation stage On November 2, the radiation chamber of the first cracking furnace of Guangdong Petrochemical's 1.
-
Wanhua Chemical's Modified Plastic Solutions Helps Lightweight Cars
Time of Update: 2022-08-25
Wanhua Chemical closely focuses on high-performance and high-tech modified plastic products, and is committed to providing downstream customers with customized overall solutions for automotive lightweight materials, so as to enhance the market competitiveness of customers' final products!The lightweight of automobiles is an inevitable trend in the development of automobiles in the future.
-
Shini Group: Competitive Ability, Nurturing Talent
Time of Update: 2022-08-25
In the early autumn of September, during the harvest season, I warmly congratulate the five colleagues of our sheet metal department, Chen Min, Wang Peina, Zhang Xinquan, Zhang Hougen, and Tao Peng, f
-
[Wen Sui Exhibition] Preview of the 22nd China (Yuyao) International Plastics Expo
Time of Update: 2022-08-25
It is a plastics industry exhibition jointly sponsored by industry associations and petrochemical industry production and distribution enterprises As an economic and trade event in the plastics industry, the Plastics Expo has gathered a large number of well-known companies in the plastic raw materials, ingredients, machinery, molds, products and other industries at home and abroad to showcase new materials, new equipment, and new processes; this exhibition is organized by domestic authorities.