-
Operating procedures of Shanghai Shenggang ultrasonic bottle washer
Time of Update: 2022-06-19
(1) The operator loads the vials into the vial tray, turns on the speed control switch, sets the speed to 10~26Hz (100~400pcs/min 7ML), and presses the RUN key to start production .
-
Features of hot melt adhesive labeling machine
Time of Update: 2022-06-19
After the label passes through the label supply wheel, it enters the shearing section for label cutting operation, and then the cut label is sent to the vacuum suction cup, which is conveyed by the conveyor belt.
-
Panasonic's Humidity Control and Advice for the Pharmaceutical Industry
Time of Update: 2022-06-19
Regardless of the environmental conditions during production, processing, storage and packaging, industrial dehumidifiers can maintain relative humidity as low as 1% or even lower .
-
Product Description of Bio-Refrigeration Heating Cycle Integrated Machine
Time of Update: 2022-06-19
The integrated biological refrigeration and heating cycle machine can display the liquid level of the heat transfer medium in the expansion tank of the system.
, heat transfer medium temperature control mode, real-time control .
-
Precautions for installation of explosion-proof high and low temperature cold and heat cycle machine
Time of Update: 2022-06-19
Therefore, attention should be paid to the installation of the flameproof high and low temperature cooling and heating cycle machine to avoid improper installation and the above failures, and strive to make the flameproof high and low temperature cooling and heating cycle machine operate effectively .
-
How to use automatic liquid filling machine
Time of Update: 2022-06-18
2. Pull out the inner core of the syringe and put the screw sleeve on the inner core of the syringe (Note: the 10ml model needs to select the gasket according to the size of its outer circle due to the large difference in the diameter of the syringe) and properly tighten it with the lower base with the screw sleeve (The disassembly and assembly of the syringe must pay attention to cleaning) .
-
How can Sihuan freeze-drying pharmaceutical freeze-drying machine prevent the vacuum pressure from falling during use
Time of Update: 2022-06-18
It can quickly freeze the dried material at low temperature, and then in a suitable vacuum environment, the frozen water molecules are directly sublimated into a process of escaping water vapor .
-
Some simple maintenance methods of Sihuan freeze-drying pharmaceutical freeze dryer
Time of Update: 2022-06-18
As long as the water pressure is higher than the pressure set by the water pressure relay, the alarm can be eliminated .
The oil pressure differential relay fails .
After the compressor starts 90s, the oil pressure difference relay will work.
-
Main features of automatic vial capping machine
Time of Update: 2022-06-18
Shanghai Shenggang automatic vial capping machine conforms to "GMP" requirements and is made of 304 stainless steel.
The main features of the automatic vial capping machine are as follows: 1.
-
Chemiluminescence IVD Industry Technical Responsibility (Part 1)
Time of Update: 2022-06-18
Figure | Classification and advantages and disadvantages of chemiluminescence immunoassays Whether it is chemiluminescence or other immunodiagnostic reagents, the most important raw materials are antibodies and antigens.
-
How to self-check the failure of biological low temperature heating unit
Time of Update: 2022-06-18
The internal control system of the electric heater of the biological low-temperature heating unit automatically adjusts the output power of the electric heater according to the temperature sensor signal at the output port, so that the temperature of the medium at the output port is uniform.
-
Knowledge of relevant accessories for explosion-proof low-temperature heating units
Time of Update: 2022-06-18
8. Manual valves are added at the connection of the equipment and at both ends of each component installation, so that it is easy to disassemble during maintenance, which can reduce the loss of heat transfer medium, and the relevant valves can be manually closed in time when problems occur .
-
Operation steps of chemical low temperature heating unit
Time of Update: 2022-06-18
The chemical low temperature heating unit is a kind of equipment that can provide constant cold source and heat source to the reactor.
3. The main circuit power switch of the equipment cannot be disconnected during normal use to maintain the normal operation of the compressor oil heater .
-
Briefly describe the key performances that should be paid attention to in nitrogen-filled packaging testing
Time of Update: 2022-06-18
Keywords: nitrogen-filled packaging, flexible plastic packaging materials, nitrogen permeation, oxygen permeation, sealing performance, heat-sealing strength, flexibility The direction of research and development tends to be less additive, green, and pollution-free, and the distribution area is becoming wider and wider, which puts forward higher requirements on the packaging technology of products to ensure that the quality of the products remains intact during the circulation process and shelf life .
-
It is very important to control the pre-freezing process of Sihuan freeze-drying pharmaceutical freeze-drying machine
Time of Update: 2022-06-18
Generally, the original biological and chemical properties of the product after being freeze-dried by a freeze-drying machine are basically unchanged, and it is easy to store for a long time .
-
What are the characteristics of the high content live cell intelligent imaging and cloud analysis system
Time of Update: 2022-06-18
3. High-Content, Versatile CytoSMART™ Omni's large optical window allows you to easily acquire full-area scan images of cell culture plates, flasks, petri dishes or other transparent culture vessels .
-
The technological process of medicine low temperature heating unit
Time of Update: 2022-06-18
The heat transfer medium of the whole circulation system of the medical low temperature heating unit is a fully closed circulation.
Even in the case of high temperature operation, the heat transfer medium in the expansion vessel will not be higher than the set value .
-
Workflow of enzyme oral liquid filling machine
Time of Update: 2022-06-18
If the pressure is detected by the centering cover of the liquid injection port, the tray will stop rising, and then the air valve will be opened, and the bottle will be filled with CO2 .
-
Briefly describe the vial powder filling machine
Time of Update: 2022-06-18
Vials are generally filled with sterile powders, or lyophilized powders; while ampoules are used for liquid preparations .
The former is made by freeze-drying the filled ampoules and then sealed, which is commonly used in biological products; the latter is obtained by sub-packaging the purified sterile powder under aseptic conditions, and is commonly used in antibiotic drugs .
-
Chemiluminescence IVD Industry Technical Responsibility (Part 2)
Time of Update: 2022-06-18
Related Beaver products are as follows: BeaverBeads® NHS Bioligand Rapid Coupling Magnetic Beads Magnetic beads modified with NHS groups on the surface, which can form stable peptide bonds with proteins and other molecules with primary amine groups for affinity purification Or analytically detect antibodies, antigens and other biomolecules .
