-
Briefly describe the vial powder filling machine
Time of Update: 2022-06-18
Vials are generally filled with sterile powders, or lyophilized powders; while ampoules are used for liquid preparations .
The former is made by freeze-drying the filled ampoules and then sealed, which is commonly used in biological products; the latter is obtained by sub-packaging the purified sterile powder under aseptic conditions, and is commonly used in antibiotic drugs .
-
Chemiluminescence IVD Industry Technical Responsibility (Part 2)
Time of Update: 2022-06-18
Related Beaver products are as follows: BeaverBeads® NHS Bioligand Rapid Coupling Magnetic Beads Magnetic beads modified with NHS groups on the surface, which can form stable peptide bonds with proteins and other molecules with primary amine groups for affinity purification Or analytically detect antibodies, antigens and other biomolecules .
-
Workflow of enzyme oral liquid filling machine
Time of Update: 2022-06-18
If the pressure is detected by the centering cover of the liquid injection port, the tray will stop rising, and then the air valve will be opened, and the bottle will be filled with CO2 .
-
The technological process of medicine low temperature heating unit
Time of Update: 2022-06-18
The heat transfer medium of the whole circulation system of the medical low temperature heating unit is a fully closed circulation.
Even in the case of high temperature operation, the heat transfer medium in the expansion vessel will not be higher than the set value .
-
Precautions for the use of Shanghai Shenggang automatic capping machine
Time of Update: 2022-06-17
Many companies now use capping machines to cap bottles, but with the increase in the use time of such equipment, the problem of poor capping effect or mechanical failure will occur, which is often the reason for not paying attention to maintenance.
-
Cleaning method of medical heating circulation device
Time of Update: 2022-06-17
1. The ground around the fuselage and the bottom should be kept clean at all times to avoid a large amount of dust being sucked into the unit and causing accidents and reducing the performance of the equipment .
-
Details to pay attention to when using the capping machine daily
Time of Update: 2022-06-17
1. When using the capping machine on a daily basis, you should pay attention to whether the operating environment meets the equipment.
Only in this way can the equipment be operated reasonably according to the job content, so that the capping machine can run smoothly for a long time.
-
How to better use the reactor heating circulation device
Time of Update: 2022-06-17
Wiring according to the specified wiring name, each device needs to be installed with a ground wire, and the value of the stirring speed should be adjusted to zero after each operation, so as to avoid the fuse being burned out by the excessive current when the power is turned on next time .
-
Correct operation method of explosion-proof heating cycle device
Time of Update: 2022-06-17
During the use of the explosion-proof heating cycle device, it is necessary to know the specific pressure value required by the experiment, and choose a professional pressure gauge to conduct the experiment within the pressure tolerance range.
-
What are the advantages of a fully automatic bottle washer over manual cleaning?
Time of Update: 2022-06-17
9. The cleaning operation of the laboratory bottle washing adopts the water cycle spray cleaning, which can effectively save the cleaning water.
-
In which fields is the heat transfer oil heating circulation device used?
Time of Update: 2022-06-17
Through the use of different technologies such as fuzzy control, intelligent technology, adaptive control, and the support of effective algorithms, the heat transfer oil heating circulation device optimizes the service function, so that it has strong applicability, and can adapt to the temperature control requirements of the reactor.
-
What are the matters needing attention in the filling and production of nucleic acid detection reagents?
Time of Update: 2022-06-17
According to GMP requirements, check whether the contact parts of the equipment and materials meet the corresponding cleanliness requirements, if not, re-clean and dry .
(8) Determine the filling speed and change the position of the belt pulley according to the adjustment results of the material viscosity and filling amount .
-
How to solve the common blockage fault of biological heating low temperature unit
Time of Update: 2022-06-17
These are relatively serious problems for equipment, and once they appear, they will seriously affect the function of biological heating low-temperature units .
If these phenomena occur in your biological heating low-temperature unit, you can make a preliminary judgment as to what is the cause .
-
Reasons for the failure of medical heating and low temperature units
Time of Update: 2022-06-17
The medical heating low-temperature unit needs to pay attention to the fact that the circuit breaker cannot be easily closed after tripping, and it is not allowed to directly start the motor across the circuit breaker.
-
Tell me how to operate the bran pulp filling machine correctly?
Time of Update: 2022-06-17
Next, press the agitator switch of the syrup filling machine to start and check the drive direction as indicated by the arrow .
-
How to solve the insufficient heating of small heating and low temperature units?
Time of Update: 2022-06-17
If the high-level oil storage tank of the small heating and low-temperature unit is often designed too short, this also leads to the rapid oxidation of the heat transfer oil in the system, resulting in insufficient heating .
-
Precautions for the use of heat transfer oil for explosion-proof heating and low-temperature units
Time of Update: 2022-06-17
Then, if the pressure gauge fluctuates abnormally or is unstable after adding the heat transfer oil online cleaning agent, it is generally caused by blockage.
The purpose of the online cleaning agent for heat transfer oil is to ensure that the coking and carbon deposits in the system are fully dissolved.
-
Precautions in the use of pharmaceutical heating low-temperature units
Time of Update: 2022-06-17
According to the temperature requirements of the reactor, the type of reaction medium of the pharmaceutical heating low-temperature unit can be determined, and supporting preparations can be made .
-
Mechanism and characteristics of extraction in microwave vacuum drying oven
Time of Update: 2022-06-17
③ Microwave vacuum drying oven extraction is less limited by solvent affinity, more solvents can be selected, and the amount of solvent is reduced .
-
Past and present life of medicinal excipients Lecithos
Time of Update: 2022-06-16
The CAS of Lecithin is 8002-43-5, which is defined as phosphatidylcholine in all animal and plant tissues, which can be used as lubricants, emulsifiers, and food additives; the CAS number of soybean lecithin is 8030-76-0, which is extracted from soybean The phospholipid mixture is mainly used for health care products and non-injection drugs.
