echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Chemicals Industry > Chemical Technology > The probability of fire at the joint of aluminum cable is about 10 times that of copper cable

    The probability of fire at the joint of aluminum cable is about 10 times that of copper cable

    • Last Update: 2022-11-20
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    Recently, Wang Zhiqiang, senior engineer of the Ninth Design and Research Institute of China Shipbuilding Industry, said at a seminar held by the Development Research Center of the State Council: "In the occasions with high requirements for reliability and safety, copper cables must be used, not aluminum cables
    .
    "Due to the different coefficients of thermal expansion of copper and aluminum metals, aluminum cable joints are prone to fire - the probability of fire is about 10 times that of copper cables, so aluminum cables can only be used
    in areas with high construction management levels such as North America.

    Wang Houyu, a well-known industrial and civil building electrical technology expert, revealed that in the past, when copper resources were tight, only important departments used copper cables
    .
    At the same time, the use of aluminum instead of copper was written into the electrical code, resulting in frequent electrical fires
    .

    Since the reform and opening up, China's power cable industry has gradually restored the reasonable structure of "copper-based", and the proportion of the aluminum cable market has decreased from 40% to about
    10%.
    However, in recent years, due to the exaggerated publicity of aluminum and aluminum alloy cables by individual aluminum alloy cable manufacturers and the media, the chaos in the industry has become prominent, and even the misleading slogan
    of "replacing copper with aluminum" has appeared.
    In addition, in the case of overcapacity in China's cable industry, blindly promoting aluminum cables to replace copper cables is bound to cause a large number of copper cable equipment to be idle, the original investment is wasted, and the output value of the entire industry has shrunk
    significantly.

    Therefore, the participating experts believe that there are many chaos in China's power cable industry aluminum cable instead of copper cable, which is seriously misleading to the market order, and it is urgent to make rational evaluation and judgment from the aspects of technology, safety and economy, and give full play to the decisive role
    played by the market in the allocation of copper and aluminum resources in the field of power cables.

    Recently, Wang Zhiqiang, senior engineer of the Ninth Design and Research Institute of China Shipbuilding Industry, said at a seminar held by the Development Research Center of the State Council: "In the occasions with high requirements for reliability and safety, copper cables must be used, not aluminum cables
    .
    "Due to the different coefficients of thermal expansion of copper and aluminum metals, aluminum cable joints are prone to fire - the probability of fire is about 10 times that of copper cables, so aluminum cables can only be used
    in areas with high construction management levels such as North America.

    Aluminum cable

    Wang Houyu, a well-known industrial and civil building electrical technology expert, revealed that in the past, when copper resources were tight, only important departments used copper cables
    .
    At the same time, the use of aluminum instead of copper was written into the electrical code, resulting in frequent electrical fires
    .

    Since the reform and opening up, China's power cable industry has gradually restored the reasonable structure of "copper-based", and the proportion of the aluminum cable market has decreased from 40% to about
    10%.
    However, in recent years, due to the exaggerated publicity of aluminum and aluminum alloy cables by individual aluminum alloy cable manufacturers and the media, the chaos in the industry has become prominent, and even the misleading slogan
    of "replacing copper with aluminum" has appeared.
    In addition, in the case of overcapacity in China's cable industry, blindly promoting aluminum cables to replace copper cables is bound to cause a large number of copper cable equipment to be idle, the original investment is wasted, and the output value of the entire industry has shrunk
    significantly.

    Therefore, the participating experts believe that there are many chaos in China's power cable industry aluminum cable instead of copper cable, which is seriously misleading to the market order, and it is urgent to make rational evaluation and judgment from the aspects of technology, safety and economy, and give full play to the decisive role
    played by the market in the allocation of copper and aluminum resources in the field of power cables.

    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.