-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
One day in 2019, the customer contacted Shini Group's Pinghu factory and proposed the need for a crusher with strong crushing capacity and wear-resistant blades, because the material to be crushed is the peeling material and leftover material of EVA foam cotton, which has strong toughness and thinness.
And adding reinforcing accessories, it is easy to wear the blade, the common general shredders on the market cannot meet customer needs, such as slow shredding can not meet the output and demand size, fast shredding will wrap the knife and jam the machine, and the blade needs to be used for about 2 days.
sharpen the knife
.
One day in 2019, the customer contacted Shini Group's Pinghu factory and proposed the need for a crusher with strong crushing capacity and wear-resistant blades, because the material to be crushed is the peeling material and leftover material of EVA foam cotton, which has strong toughness and thinness.
SG-90200B Large Grinder
In response to the customer's troubles, Shini recommended the SG-90200B shredder, which is equipped with a Siemens motor with a power of 250kW, adopts the design of 7 rows of knives and 3 rows of fixed knives, and has a small cutting gap.
It adopts V-shaped cutting technology.
The 4 movable blades are arranged in a V shape, which can well cope with the characteristics of the customer's material.
The usage conditions are as follows:
1.
The customer used 5 motor power 50kW pulverizers in the early stage, but the total production capacity was less than 1000kg/hr, while the production capacity of SG-90200B when running at full load was 2000kg/hr.
The storage silo 20 meters away on the third floor has the same energy consumption and twice the output
.
2.
The total number of equipment has been reduced to one.
Compared with the previous team of 5 machines, 2 operators per machine, and a total of 10 people, now only 2 people can complete the corresponding work, and the number of labor has dropped by 80%, which greatly saves labor costs
.
3.
In the early stage, the customer's own blade needs to be sharpened for 1 to 2 days when crushing the reinforcing material, but in the actual use process of SG-90200B, due to its special treatment and exquisite design according to the customer's material and needs, It can be used continuously for one month without sharpening the knife, which greatly improves the utilization rate of equipment, and the effect greatly exceeds customer expectations
.
