Shanghai Sanshu Industrial Plastics Laser Welding Technology Application Theme Promotion Conference was held

On the morning of November 7th, Shanghai Sanshu Industrial .

Wan Guoqiang, Manager of Shanghai Sanshu Industrial .

Three beam laser plastic laser welding process advantages:

The principle of plastic laser welding is to assemble two plastic parts to be welded together with external pressure, and directionally project a beam of short-band infrared laser to the area to be welded, thereby realizing plastic laser weldi.

The laser beam passes through the upper light-transmitting material, and absorbs the short-band infrared laser through the lower materi.

For the product material itself, short-band infrared cannot be absorb.

Some actual case products:

Independent research and development of special lasers for plastic welding and synchronous welding laser syste.

Its product features: It has low-latency power closed-loop control, which can measure the reference temperature and power of real-time control welding points onli.

Laser for plastic welding

Double-station quasi-synchronous plastic laser welding machine

It has the following characteristics: the fastest welding efficiency within a small-format plane of about 150*150mm, or 3D quasi-synchronous laser welding; the welding efficiency is close to synchronization; grating protection, double-start welding; ;Improve the utilization rate of the equipment, which can meet the remote online automatic welding; It can realize the visualization and traceability of welding data; Laser power online monitoring, pressure, penetration control, temperature control, e.

Double station quasi-synchronous plastic laser welding machine

Transparent plastic laser welding machine

It has the following characteristics: clean welding, which can realize welding without adding light absorber; high laser absorption rate and fast heat conduction; high degree of automation, which can be quickly integrated with automated production lines; customized models or light spots can be customized according to customer needs;

Transparent Plastic Laser Welding Machine

It is reported that the three-beam laser has specially developed the detection software equipped with its models, including: air tightness detection equipment, MES traceability software, and welding process monitoring softwa.

Three beam automatic welding, air tightness detection, coding, dust removal, MES product quality traceability, flexible production system

About the three-beam laser:

Shanghai Sanshu Industrial .