-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Take two samples, one for determination of moisture content, and the other for toxicity leaching experiment
1.
Weigh 50~100g sample in a lidded container and dry it at 105℃.
2.
Take an appropriate amount of a mixture of concentrated sulfuric acid and concentrated nitric acid with a mass ratio of 2:1 and add it to ultrapure water, measure the pH with a pH meter, and adjust the solution to make the pH 3.
3.
Weigh 150~200g sample (the diameter of the sample should be less than 9.
Note: If the sample contains the initial liquid phase, it should be carried out first
4.
The leachate is filtered by a high-pressure filter, and the filter membrane is made of disposable glass fiber membrane or microporous membrane (with a pore size of 0.