Liaoning Kingfa 600,000 tons of PDH plant successfully started

On November 24, the deoiling tower of Liaoning Kingfa PDH plant introduced propane and reducing gas into the reactor and realized the reactor feeding
.
On November 27, propylene produced by PDH was introduced into the acrylonitrile feed tank
.
With the successful start-up of the PDH unit, it marks that Liaoning Kingfa's annual output of 600,000 tons of ABS and its supporting equipment project has achieved the whole process on November 27
.

The commissioning time of each set of equipment of the project is: June 26, the ABS unit was successfully put into operation, and the full production and full consumption were realized in the later stage; On October 24, the acrylonitrile plant was successfully put into operation; The PDH unit was successfully fed on November 24 and produced a qualified product
on November 27.

It is reported that "Liaoning Jinfa" was formerly known as "Liaoning Bora New Materials Co.
, Ltd.
" (hereinafter referred to as "Bora New Materials"), Bora New Materials 600,000 tons of ABS and its supporting equipment project started on October 8, 2020, the project mainly constructs 600,000 tons/year PDH plant, 600,000 tons/year ABS unit, 260,000 tons/year acrylonitrile plant, 100,000 tons/year MMA device and supporting devices
。 In order to supplement the company's ABS shortcomings, Kingfa Technology acquired Bora New Materials, and in 2021, it acquired 51.
09% of the equity of Bora New Materials, and in March 2022, Kingfa Technology introduced and Guangzhou Tengxichen, Panjin Jinfa and Jinshi New Materials Fund to jointly increase the capital of Bora New Materials, and the total shareholding ratio increased to 72.
66%.

In April 2022, Bora New Materials changed its name to Liaoning Jinfa
.

Kingfa Technology will form a PDH production capacity of 1.
8 million tons/year

In addition to Liaoning Kingfa's 600,000 tons/year PDH plant, Kingfa Technology also has a 600,000-ton/year PDH plant under operation and a 600,000-ton/year PDH plant under construction, and the total PDH production capacity of Kingfa Technology will reach 1.
8 million tons/year
after all are put into operation.

(1) In operation 600,000 tons/year PDH plant

The first phase of Ningbo Kingfa's 1.
24 million tons/year propane and hybrid carbon four utilization project was completed and successfully put into operation in 2014, with the main production capacity including 600,000 tons/year propane dehydrogenation unit, 600,000 tons/year isooctane plant, 40,000 tons/year methyl ethyl ketone plant, and 1 million tons/year gas separation unit
.

(2) 600,000 tons/year PDH unit under construction

Ningbo Kingfa 1.
2 million tons/year polypropylene thermoplastic elastomer (PTPE) and modified new material integration project started construction on June 10, 2020, with a total investment of 10.
5 billion yuan, and the project was constructed
in two phases.
The first phase plans to invest about 6 billion yuan, mainly to build 600,000 tons/year of propane dehydrogenation, 800,000 tons/year of polypropylene, 400,000 tons/year of modified polypropylene new material production lines and supporting public works
.
Among them, the PDH plant adopts the Lummus process and is scheduled to be put into operation
before 2023.
The second phase will mainly build one set of 600,000 tons/year propane dehydrogenation plant and one set of 400,000 tons/year polypropylene plant, etc.
, which is planned to start construction in 2023 and will be completed
by the end of 2026.

On September 28th, the cryogenic tank and supporting project of Ningbo Kingfa Integration Project successfully realized the project of CCTV
.
The project includes a 120,000 li low-temperature propane tank, a 10,000-li low-temperature ethylene tank and supporting facilities, mainly undertaking the receiving, storage and export tasks
of low-temperature propane and low-temperature ethylene.

On August 16, the sixth section of the separation tower of the 600,000 tons/year PDH plant of the integrated project was successfully
hoisted.