-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
"DMP Greater Bay Area Industrial Expo" (referred to as "Greater Bay Area Industrial Expo") will be held at the Shenzhen International Convention and Exhibition Center (New Hall) on November 24-27, 2020
.
As a professional manufacturer of one-step blow molding machines with leading technology in China, Liuzhou Jingye Machinery Co.
, Ltd.
(referred to as Jingye Machinery) will exhibit the fully automatic one-step "injection-draw-blow" blow molding machine WISB at this exhibition.
-88AS, supporting "one out four" PET thick-wall cream bottle mould , booth number: 10L15 , welcome to visit the booth!
, Ltd.
fully automatic one-step "injection-pull-blow" blow molding machine WISB-88AS, supporting "one out four" PET thick-wall cream bottle mold Booth No.
: 10L15
This model can be used in cosmetics, pharmaceutical industry packaging and other fields
.
The fully automatic one-step injection stretch blow blow molding machine of Jingye Machinery has the following advantages:
1.
A three-station layout is adopted, that is, the first station injects the preform, the second station stretches and blows the bottle, and the third station takes off the bottle
.
2.
After the tube blank is injection-molded, the heat retained by itself is used to directly carry out stretch blow molding, which avoids the shortcoming that the tube blank needs to be cooled first, loses heat, and then is reheated and then consumed, which can greatly reduce energy consumption.
waste
.
3.
The product is formed only once, and there is no intermediate transfer link, which completely eliminates the surface damage caused by the collision of the tube blanks
.
4.
To produce thick-walled cream bottles, compared with the "injection blow" process of the Jingye machine, this "injection stretch and blow" machine has more application advantages in the process:
1) The available raw materials for the "injection blowing" process are PETG, and the available raw materials for the "injection stretch blowing" process are PET and PETG;
2) The output is higher, the "injection blowing" process is one out of two, and the "injection stretch and blow" process is one out of four;
3) The process conditions are more friendly, and the temperature setting of the auxiliary equipment of the mold is low, which avoids the related problems caused by the high working temperature of the main engine caused by the transmission of excessive mold temperature, thus making the production process more stable
.
4) Fewer auxiliary machines are required
.
Jingye Machinery was founded in 1997, focusing on the production of fully automatic one-step "injection blow", "injection stretch blow" blow molding machines and related supporting molds.
It is one of the early enterprises in mainland China engaged in this industry
.
At present, the products mainly include "injection blow" series and "injection stretch blow" series and related supporting molds, with more than 20 models, which can produce PET bottles, sports water cups, baby bottles, daily chemical packaging, cosmetic packaging, food and beverage, pharmaceutical packaging etc.
, the raw materials that can be used include PET, TRITAN, HDPE, LDPE, PP, PS, PC, PETG, PES, PPSU,
etc.
From November 24th to 27th, Jingye Machinery ( Booth No.
: 10L15 ) will meet you at Shenzhen DMP Exhibition and start an industrial journey together!
: 10L15
