China's adhesive and adhesive tape industry will implement ten new standards in 2023

Recently, the National Standardization Administration and the Ministry of Industry and Information Technology have successively released a number of new technical standards
for the adhesive and adhesive tape industry that will be implemented in 2023.
In order to enable the whole industry to grasp and follow up the latest progress of various standard work, the China Adhesive and Adhesive Tape Industry Association has collected and sorted out this, focusing on interpreting a number of national standards and industry standards that China's adhesive and adhesive tape industry will be implemented in the first half of 2023 for readers
.

1.
Determination of puncture resistance of adhesive tape (GB/T 41657—2022) This document describes the determination method of puncture resistance of adhesive tape, which is suitable for the determination and evaluation
of the puncture resistance of adhesive tape.
Implementation date: 2023-02-01

2.
Determination of adhesive viscosity (GB/T 2794—2022) This document describes the method of measuring the viscosity of adhesive using single-cylinder rotational viscometer, cone plate rotational viscometer and rotational rheometer, which is suitable for the determination
of adhesive viscosity.
This standard replaces GB/T 2794-2013 standard
.
Implementation date: 2023-05-01

3.
Evaluation requirements for green factories in polyurethane resin industry (HG/T 6059—2022) This document stipulates the general rules, evaluation indicators and requirements, evaluation procedures and evaluation reports of green factories in polyurethane resin industry, which is suitable for green factory evaluation of polyurethane resin (polyurethane sole original solution, polyurethane leather resin, polyurethane elastomer (TPU, CPU), polyurethane adhesive) manufacturers, and other polyurethane resin manufacturers can refer to the implementation
.
Implementation date: 2023-04-01

4.
Adhesives for labels (HG/T 6099—2022) This document specifies the classification, technical requirements, test methods, inspection rules, packaging, transportation, storage and marking of adhesives for labels, etc.
, and is suitable for water-based adhesives for labeling glass
bottles.
Implementation date: 2023-04-01

5.
Acrylate-based heat-curing impregnated sealant for metal die castings (HG/T 6100—2022) This document specifies the terms and definitions, classification, requirements, test methods, inspection rules, markings, packaging, transportation and storage of acrylate-based hot-curing impregnated sealants for metal die castings, and is suitable for acrylate-based sealants
that use impregnation process to seal microporous defects inside metal die-casting by heat curing.
Implementation date: 2023-04-01

6.
Upper and lower adhesive tape for electronic component packaging (HG/T 6101-2022) This document specifies the terms and definitions, product classification, technical requirements, inspection methods, inspection rules, marking, packaging, transportation and storage requirements of upper and lower adhesive tape for electronic component packaging, and is suitable for hot-melt pressure-sensitive adhesive tape
for packaging and transmission of electronic components.
Implementation date: 2023-04-01

7.
Universal biaxially oriented polypropylene film pressure-sensitive adhesive tape (HG/T 6102—2022) This document specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements of the general biaxially oriented polypropylene film pressure-sensitive adhesive tape series, which is suitable for biaxially oriented polypropylene film as the substrate, the pressure-sensitive adhesive is evenly coated on the treatment surface of the polypropylene film, and then cut and other processes to make polypropylene film pressure-sensitive adhesive tape series products, the product is mainly used for packaging, sealing, bundling and pasting, etc
.
Implementation date: 2023-04-01

8.
Polyurethane building sealant (JC/T 482-2022) This document specifies the terms and definitions, classification, general requirements, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of polyurethane construction sealant, which is suitable for one-component and multi-component polyurethane construction sealants
with carbamate polymer as the main component.
This standard replaces JC/T 482-2 003 standard
.
Implementation date: 2023-04-01

9.
Polysulfide building sealant (JC/T 483-2022) This document specifies the terms and definitions, classification, general requirements, technical requirements, test methods, inspection rules, markings, packaging, transportation and storage of polysulfur building sealant, suitable for room temperature vulcanized multi-component building sealant based on liquid polysulfide rubber, not suitable for polysulfide sealant for insulating glass secondary sealant
.
This standard replaces JC/T 483-2006 standard
.
Implementation date: 2023-04-01

10.
Butyl rubber waterproof sealant adhesive tape (JC/T 942-2022) This document stipulates the terms and definitions, classification, general requirements, technical requirements, test methods, inspection rules, marks, packaging, transportation and storage of butyl rubber waterproof sealant adhesive tape, suitable for butyl adhesive tape for joint sealing in building waterproof engineering, among which, the specified butyl adhesive tape is suitable for polymer waterproof membrane, cement concrete and mortar, metal plate and other substrates
.
This standard replaces JC/T 942-2004 standard
.
Implementation date: 2023-04-01