-
Modern water-based coating technology, formulation and application
Time of Update: 2021-03-17
The third chapter discusses the application of water-based coatings in the field of construction and industrial coating extensively on the basis of systematic discussion of water-based coating production technology, production technology and formula, and finally briefly introduces the quality assurance system of water-based coatings.
-
Dark red exterior wall latex paint formula
Time of Update: 2021-03-17
After the filtration is completed, under low-speed stirring, add wetting agent, defoamer, film-forming aid, emulsion to the above-mentioned dispersion slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make the pH Value is 8.
-
How much do you know about elastic latex paint?
Time of Update: 2021-03-17
5~2, 215 titanium dioxide 45~55, wollastonite powder 80~150, kaolin 40~60, 800 mesh heavy calcium carbonate 120~180 , Water-based fluorocarbon resin 100~120, styrene-acrylic emulsion 50~100, elastic emulsion 250~300, film forming aid 5~20, wetting agent X-405 1~3, rheology modifier 2~5, increasing Thickener 5~10.
-
Environment-friendly thermal insulation nano coating formula
Time of Update: 2021-03-17
PrecautionsThe range of the mass ratio of each component of the environmentally friendly thermal insulation nano coating formulation is: synthetic water-based resin 140~750, nano-pigment and filler slurry 50~100, film forming aid 10~20, coupling agent 5~20, defoaming Agent 5-10, leveling agent 5-10, wetting agent 5-10.
-
What are the factors that cause the color difference of the paint on the wall?
Time of Update: 2021-03-17
4. Uniformity of coatingDifferent pigments have different effects on the color saturation due to the adjustment; the same color is easy to produce stains on the surface of the same board due to different construction methods, different operating habits and other factors, such as the difference in thickness between different boards.
-
Tender green interior wall latex paint formula
Time of Update: 2021-03-17
After the filtration is completed, under the condition of low-speed stirring, add wetting agent, defoamer, film-forming aid, emulsion to the above-mentioned dispersed slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make The pH value is 8.
-
Blue interior wall latex paint formula check
Time of Update: 2021-03-17
After the filtration is completed, under low-speed stirring, add wetting agent, defoamer, film-forming aid, emulsion to the above-mentioned dispersion slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make the pH Value is 8.
-
How many types of pigments and fillers are there?
Time of Update: 2021-03-17
Pigments and fillers can be roughly divided into four categories according to their properties and functions: coloring pigments, metallic pigments, functional pigments, and extender pigments (fillers).
Functional pigments: mainly include fluorescent pigments, luminous pigments, high temperature resistant pigments, conductive pigments, etc.
-
China powder coating information and application manual download
Time of Update: 2021-03-17
The first chapter is about powder coating materials, introducing epoxy resin, polyester resin, acrylic resin, thermoplastic resin, additives, pigments and fillers;The second part is equipment, equipment and pre-treatment, which introduces powder-making equipment, pre-painting, coating equipment, and testing equipment; the third is powder coatings, which introduces thermosetting powder coatings and thermoplastic powder coatings; in addition, there are Company information, domestic and foreign powder coating additives manufacturers and their main products.
-
Check the formula of high solids water-based interior wall latex paint
Time of Update: 2021-03-17
Recipe details (parts by mass)Production MethodDuring the preparation, the pigment and filler dispersion stage: add water, cosolvent, wetting agent, dispersant, defoamer, pigment and filler in sequence, and disperse at high speed until the pigment and filler reach the specified fineness.
Paint mixing stage: Add emulsion, film-forming aids, and thickeners in sequence under low-speed stirring to make qualified finished products.
-
Formula of water-based stain-resistant heat-reflective phase change thermal insulation coating
Time of Update: 2021-03-17
PrecautionsThe mass ratio of each component of the water-borne stain-resistant heat-reflective phase-change heat-insulating coating formula is as follows: film-forming emulsion 25-50, heat-reflective pigment 10-25, infrared emission filler 2-15, additive 1-6, and Ionized water 20~30.
-
Triton X-405
Time of Update: 2021-03-17
Chinese alias: polyoxyethylene (10) isooctyl cyclohexyl ether
Hazard code (Europe): Xn, N, Xi
Risk Statement (Europe): 22-41-51/53-36/37/38
Safety Statement (Europe): 26-61-36/37-36/39
Excellent emulsifier and wetting agent with high HLB value, very effective for improving emulsion stability and freeze-thaw stability of latex paint system.
-
What are the differences between metallic paint and ordinary paint?
Time of Update: 2021-03-17
The most typical colors of ordinary paint are black, red and white.
The most typical colors of ordinary paint are gray-black, bright red and milky white.
2. The difference between lacquerCompared with ordinary paint, the paint surface of metal paint is harder.
-
Free download of powder coating and raw material inspection method manual
Time of Update: 2021-03-17
brief introductionThis book introduces in detail the inspection methods of powder coatings, epoxy resins, polyester resins, acrylic resins, powder coating additives, pigments and fillers.
Chapter Four Performance Inspection of Acrylic Resin and Its Curing Agent
-
Water-based anti-radiation heat insulation coating formulation
Time of Update: 2021-03-17
. Application fieldThe formulation of water-based anti-radiation thermal insulation coatings is mainly used for the exterior walls of buildings.
, then add the pigments, fillers, anti-radiation powder, and part of the heat insulation powder, and disperse into a paste in a high-speed disperser.
-
The characteristics and classification of rosin-modified phenolic resin and its application in offset printing inks
Time of Update: 2021-03-17
Due to the unique honeycomb structure characteristics of rosin-modified phenolic resin, it has a good wetting effect on the pigments, and a certain viscoelastic binder can be obtained after proper reaction with the gelling agent, so it is widely used in offset printing inks.
-
Two-component anticorrosive coating formulation
Time of Update: 2021-03-17
. After mixing the obtained components A and B according to the proportion, it becomes a kind of anticorrosive primer with high performance and low surface treatment requirements that can be applied to various parts of ships, can be cured in four seasons, and has substrate adaptability and topcoat compatibility ( Known as "H2005 titanium nickel nano universal anti-rust primer").
-
Download the 2015 edition of alkyd resin coatings for free
Time of Update: 2021-03-17
Chapters 1 to 5 are introduction, manufacturing principles, technology, development status, and production process pollution prevention of alkyd resin coatings, driers, etc.
The sol-gel technology modification and the synthesis and performance of hyperbranched alkyd (polyester) resin are listed in a separate chapter, in order to attract readers' attention.
-
Correlation between xenon lamp aging and pigment weather resistance from natural exposure testing (2)
Time of Update: 2021-03-16
the data in Figures 4 and 5, it can be seen that the color of each sample changes, whether it is outdoor exposure or xenon lamp acceleration testing, and the value of DE increases as the test time increases.
-
Application of redstone nano-titanium dioxide in vehicle coatings (2)
Time of Update: 2021-03-15
From Table 3, it can be seen that NTG-602nm titanium dioxide is of great help to improve the weather resistance of light blue acrylic metal drying paint, with the increase of NTG-602B nano-titanium dioxide addition, the coating film after artificial aging to produce loss of light, color change phenomenon decreasing, because nano-titanium dioxide has the effect of ultraviolet absorption, scattering function.
