You don't even know how to paint and cut materials

Painting is the decoration link that every decoration owner has to go through. Because the painting process is more, and the time is longer, it is also relatively easy to steal the work of the link. Here's a look at some of the most common job-stealing behaviors during painting.
Exmaint the common brush paint stealing work cut the practice
brush paint can steal work cut the place, Fukuo small editor summarized the following five points, mainly the grass-roots putty not scraped flat, save the grinding process, reduce the number of paint,
paint
too much water, to poor filling good exchange paint. Let's take a closer look at the doorways in the paint that steal the cut.
Washing paint stealer cut material reduction one, grass-roots putty not scraped flat
grass-roots treatment is a necessary process for wall decoration, the most common process of handling grass-roots work-stealing is that some construction teams in order to save time and work. Without flattening the wall, you are anxious to do the follow-up process. When brushing putty, no tools are used to ensure that the brush is smooth.
Brush paint stealer cut material two, save the grinding process
in putty and primer dry, generally need to use fine sandpaper to polish again, in order to reduce the wall brush marks, so that the wall more smooth. But some construction workers, in order to save time, often use sandpaper this wipe that wipe to make a look, some even do not have this process at all.
Uncover the common practice of brushing work cut
paint stealing work cut three, reduce the number of brushing
the number of times the general wall paint is "one base two sides", that is, once primer, two times paint. Bad decoration company in the construction, often do not brush primer or only paint once, because the effect is not very different, if the owner does not keep an eye on the words, it is difficult to find the problem in a short period of time.
Brush paint stealer cut material four, paint water too much
before painting, often need to calculate according to the paint area of the approximate amount of paint, so as to purchase in advance. Some bad construction workers, in the deployment of paint, may take the means of adding too much water, so that the brush down, will save a lot of raw paint, and then may fall into the hands of workers. But the brush is too much water, the deployment of thin paint, the paint film of the wall is too thin, easy to be scratched, moldy and so on.
Shot paint stealing work cut five, to poor filling good exchange of paint
the most serious kind of work-stealing cut-off behavior is through various methods to the owners to buy high-quality brand paint replaced with inferior counterfeit products. If the owner does not understand the line, a little careless, it is difficult to find the problem.
。