You are looking for the "Industrial Coating Thickener" instruction manual

Original: You are looking for the "Industrial Coating Thickener" instruction manual

Industrial coating thickener is a water-based acrylic acid copolymer type of highly efficient thickener that does not contain volatile organic matter, which mainly increases the viscosity at high shear rates, so that the product has rheological behavior similar to Newtonian fluids

Thickener for industrial coatings

Industrial coating thickeners have little effect on low and medium shear forces, and the viscosity and sagging resistance of the system are virtually unchanged

Industrial coating thickeners can be compatible with various adhesives, easy to mix, good

Applications: Architectural coatings, printing coatings, waterborne industrial coatings, leather coatings, adhesives and other waterborne systems

Interior and exterior wall coatings

How to use thickeners for industrial coatings:

Industrial coating thickener can be added to the abrasive coating, when the pre-adjustment paint stage can also be added after the best consistency effect, in this case, it is necessary to pay attention to check the compatibility of the coating system, due to the high affinity for the surface of the polymer particles, so it may cause condensation or flocculation due to excessive local interaction, such as this phenomenon, it is recommended to add a small number of times, can also be diluted to 10% concentration before use

Source of the article: The article is from "China Federal Thickener", please indicate the source when

Responsible Editor: