Xenon lamp aging test chamber prohibited operation

Xenon lamp aging test chamber in the process of use will have some prohibited operations and important precautions, so why pay attention to these matters? The following are the things
that need to be paid attention to in the work.

The requirements of the xenon lamp aging test chamber are very strict, in the operation process, we must be more careful, which aspects will have an impact must not be forgotten, in this special reminder to everyone
.

First, in the process of operation, we must not open the test chamber door without the need to open, unless in special circumstances can be opened, in this process we still have to minimize the time
to open the box door.

It may cause the test sample to rush out of the box door and cause personal injury, etc.
; Second, the equipment must be grounded to avoid electrostatic induction; Third, the operator should have safety protection measures, regularly check the water pressure controller and the water level of the circulating water tank; Fourth, the test cloth of the wet bulb should ensure that there is a certain amount of moisture or relative humidity; Fifth, before doing the test, be sure to check the equipment and read the instruction manual; Sixth, the location of the test chamber installation must be in a well-ventilated place with no light; Seven, the place where the equipment is placed can not have flammable and explosive and other related items, so as not to produce a series of safety hazards such as explosions, etc.
Xenon lamp aging test chamber must first be checked in accordance with the above experience when doing the test, so that it can effectively ensure that the test chamber is safe in the steps of doing the test, of course, the results of the test can also be guaranteed to be accurate
.