-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
What is the purpose of maintaining its accessories in the process of using the reactor high and low temperature cycle integrated machine? First of all, if maintenance is not carried out, it will affect the effect.
If it is serious, the high temperature alarm will cause the refrigeration part to fail to operate normally.
Secondly, the low temperature and low pressure refrigerant can be compressed into high temperature and high pressure gas, and then the temperature of the refrigeration system can be prevented due to failure.
Rise up, damage the pump shaft seal and water pipe and cause water leakage
.
In addition, the various components of the high and low temperature cycle integrated machine of the reactor leak and infiltrate air.
The infiltration of air increases the extra burden on the equipment, and even causes it to fail to be evacuated in severe cases
.
In addition to this reason, it is also possible that the cooling water is insufficient or the water temperature is too high or the steam pressure is too high.
The insufficient cooling water is mainly caused by pipeline blockage and valve damage.
The insufficient cooling water prevents the secondary steam from being condensed in time, which seriously affects the reactor height Low temperature cycle integrated machine operation
.
Secondly, the inlet water temperature of the cooling water is too high, and a large amount of secondary steam generated by heating cannot be condensed in time, and the vacuum of the high-low temperature cycle integrated machine of the reactor decreases rapidly.
The generation of a large amount of secondary steam increases the load of the cooling equipment and gradually reduces the vacuum degree
.
The reduction of the vacuum degree increases the evaporation temperature of the material, which not only affects the product, but also reduces the production capacity.
Therefore, try to avoid these problems
.
In addition, the evaporator of the integrated reactor with high and low temperature cycle needs to be cleaned regularly to prevent pipeline blockage from affecting the operation of the integrated high and low temperature cycle of the reactor
.
If it is serious, the high temperature alarm will cause the refrigeration part to fail to operate normally.
Secondly, the low temperature and low pressure refrigerant can be compressed into high temperature and high pressure gas, and then the temperature of the refrigeration system can be prevented due to failure.
Rise up, damage the pump shaft seal and water pipe and cause water leakage
.
In addition, the various components of the high and low temperature cycle integrated machine of the reactor leak and infiltrate air.
The infiltration of air increases the extra burden on the equipment, and even causes it to fail to be evacuated in severe cases
.
In addition to this reason, it is also possible that the cooling water is insufficient or the water temperature is too high or the steam pressure is too high.
The insufficient cooling water is mainly caused by pipeline blockage and valve damage.
The insufficient cooling water prevents the secondary steam from being condensed in time, which seriously affects the reactor height Low temperature cycle integrated machine operation
.
Secondly, the inlet water temperature of the cooling water is too high, and a large amount of secondary steam generated by heating cannot be condensed in time, and the vacuum of the high-low temperature cycle integrated machine of the reactor decreases rapidly.
The generation of a large amount of secondary steam increases the load of the cooling equipment and gradually reduces the vacuum degree
.
The reduction of the vacuum degree increases the evaporation temperature of the material, which not only affects the product, but also reduces the production capacity.
Therefore, try to avoid these problems
.
In addition, the evaporator of the integrated reactor with high and low temperature cycle needs to be cleaned regularly to prevent pipeline blockage from affecting the operation of the integrated high and low temperature cycle of the reactor
.