Which materials are not suitable for processing with candy press presses?

Candy press presses are used to press various granular raw materials into discs and special-shaped sheets
.
It is a basic equipment
suitable for mass production.
Its structure is double-pressed, with two sets of feeding devices and two sets of wheels
.
33 pairs of molds can be installed on the turntable, and 66 pieces
can be pressed in one turn.
During tablet pressing, the speed of the rotary table, the depth of filling of the material and the thickness of the tablet can be adjusted
.
The mechanical cushioning device on the machine avoids damage
to parts caused by overload.
The machine is equipped with a powder suction box, which can absorb the dust generated during the operation of the machine, avoid sticking and blockage, and can recycle raw materials for reuse
.
Candy compression rotary tablet press is a miniaturized machine based on automatic rotary and continuous tablet press, mainly used for process research in pharmaceutical, chemical, food, electronics and other industrial sectors to confirm whether granular raw materials can be pressed into tablets
.
This machine is suitable for pressing granular raw materials (within the pressure range of this machine) that can be pressed into tablets, and its powder content (more than 100 mesh) does not exceed 10%.

This machine is suitable for pressing 4~12mm round, special-shaped and lettering sheets
.
This machine is not suitable for pressing semi-solid, wet particles, low melting point, easy moisture absorption raw materials and non-granular powders
.
1.
The periphery is fully enclosed and the material is stainless steel
.
The inner countertop is made of stainless steel, which can maintain the surface gloss, prevent cross-contamination, and meet GMP requirements
.
2.
The mechanical operation
can be clearly seen through the transparent protective cover.
It can be fully opened for easy cleaning and maintenance
.
3.
The speed is stepless and can be adjusted
at will.
4.
Easy to operate, stable rotation, safe and accurate
.
Mechatronics is implemented, and the touch screen PLC is used for control and operation
.
5.
The transmission system is sealed in the oil tank under the main body of the
machine.
It is a safely separated independent component that does not contaminate
each other.
In addition, the propeller shaft will invade the lubricating oil pool, which is fully lubricated and noise and wear will be reduced
.
6.
The mechanical vacuum suction device of candy compression tablet press can absorb flying dust
in the suppression chamber.
7.
When pressing double-layer sheets, the output will be halved
.