What to pay attention to when cleaning the reactor temperature controller

Reactor temperature control machine to heat transfer oil as the medium, temperature control range at room temperature wide, widely used in various industries, for different industries of temperature control needs, can ensure that the reactor temperature control machine temperature in a reasonable controllable range range, effectively play a role in cooling, in a closed liquid circulation system, used for exchange
.

Can better keep the equipment has a good operating efficiency and service life, in the cleaning need to pay attention to the following points: 1, after two months of normal operation, need to stop and remove the filter for cleaning
.

2.
The heat transfer oil of the reactor temperature control machine should be replaced regularly according to the use temperature, so as to avoid the problem that
the temperature cannot be added.

3.
In the normal use process, regularly use dry compressed air to clean up the metal residue and dust on the pump blade cover inside the machine, to prevent the fan blade cover from being blocked, the motor heat dissipation is not good, causing the pump motor to sound or stutter, try to keep the blade cover clean
.

5.
In the case of power failure, dry compressed air is used regularly to clean the dust inside the machine electrical box and the cooling fan, so as to avoid metal residue falling on the electrical components and causing electrical failure
.

6.
In the case of shutdown, regularly clean the machine oil return port filter to avoid machine over-temperature alarm and other failures
caused by filter blockage.

7.
If the heat conduction medium is water, keep the water source clean, which is not easy to scale and prevent pipeline blockage
.

Make sure the reactor thermostat uses a clean thermally conductive medium
.