-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Electric blast drying oven is widely used in electromechanical, chemical, plastic, light industry and other industries and scientific research units to bake, dry, cure, heat treatment and other convenient heating of various products and sample.
Not suitable for volatile item.
Pharmaceuticals, living substances, chemicals, food, electronics and other industries are more sensitive to this phenomeno.
Too much temperature overshoot refers to the phenomenon in which the studio temperature exceeds the set temperature by more than 6°C, and then slowly reduces and stabilizes at the set temperatur.
Of course, there is no limit index of temperature overshoot in the standard of electric blast drying ove.
There are ways to make the temperature overshoot to an acceptable level, it is impossible to eliminate the temperature overshoo.
Two-stage heating method; first set the temperature of the instrument at a temperature difference of 5-10 °C from the required temperatur.
at the baking temperatur.
In this method, care should be taken to prevent burns by taking care of the operato.
Empty box permanent fixation method; first empty the box to raise the temperature of the studio to the required baking temperature, and then quickly put the sample into the studi.
It is also necessary to pay attention to the new danger that may arise due to the rapid evaporation of the volatiles of the sample to be bake.
Not suitable for volatile item.
Pharmaceuticals, living substances, chemicals, food, electronics and other industries are more sensitive to this phenomeno.
Too much temperature overshoot refers to the phenomenon in which the studio temperature exceeds the set temperature by more than 6°C, and then slowly reduces and stabilizes at the set temperatur.
Of course, there is no limit index of temperature overshoot in the standard of electric blast drying ove.
There are ways to make the temperature overshoot to an acceptable level, it is impossible to eliminate the temperature overshoo.
Two-stage heating method; first set the temperature of the instrument at a temperature difference of 5-10 °C from the required temperatur.
at the baking temperatur.
In this method, care should be taken to prevent burns by taking care of the operato.
Empty box permanent fixation method; first empty the box to raise the temperature of the studio to the required baking temperature, and then quickly put the sample into the studi.
It is also necessary to pay attention to the new danger that may arise due to the rapid evaporation of the volatiles of the sample to be bake.
