-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
During the long-term operation of purified water equipment, it is inevitable that some faults will occur.
We can master some fault countermeasures to ensure that the problem can be solved in a timely and effective manner when the equipment fails.
Today, Xiaobian will show you about purified water equipment.
What should I do if there is a water leak? 1.
In this case, the diaphragm pump of purified water equipment should be removed for professional maintenance or replacement; special attention: after the maintenance is completed, a strict review should be carried out to check whether there is water leakage: ① Wipe the residual water with a dry cloth
.
②Use dry facial tissue to touch the joint to observe whether the facial tissue is soaked with water
.
2.
The reason for water leakage at the connection part of the hose connector of the purified water equipment is usually that the hose is not inserted in the quick connector in place.
At this time, you only need to pull out the hose and reinsert it.
The hose will feel when it is in place, and then add the lock.
.
If it still leaks, check: ①Is there any debris in the joint that affects the sealing? If necessary, remove it completely
.
②Is the surface of the hose strained? There are obvious grooves and water seepage.
In this case, the injured part of the hose should be cut off or replaced, and the intubation should be strictly in accordance with the operating specifications
.
The above are the common causes of water leakage in purified water equipment, and the solutions to solve them.
For more reference materials on the daily operation and maintenance of purified water equipment, you can continue to pay attention to this website and we will push it to you every day
.
We can master some fault countermeasures to ensure that the problem can be solved in a timely and effective manner when the equipment fails.
Today, Xiaobian will show you about purified water equipment.
What should I do if there is a water leak? 1.
In this case, the diaphragm pump of purified water equipment should be removed for professional maintenance or replacement; special attention: after the maintenance is completed, a strict review should be carried out to check whether there is water leakage: ① Wipe the residual water with a dry cloth
.
②Use dry facial tissue to touch the joint to observe whether the facial tissue is soaked with water
.
2.
The reason for water leakage at the connection part of the hose connector of the purified water equipment is usually that the hose is not inserted in the quick connector in place.
At this time, you only need to pull out the hose and reinsert it.
The hose will feel when it is in place, and then add the lock.
.
If it still leaks, check: ①Is there any debris in the joint that affects the sealing? If necessary, remove it completely
.
②Is the surface of the hose strained? There are obvious grooves and water seepage.
In this case, the injured part of the hose should be cut off or replaced, and the intubation should be strictly in accordance with the operating specifications
.
The above are the common causes of water leakage in purified water equipment, and the solutions to solve them.
For more reference materials on the daily operation and maintenance of purified water equipment, you can continue to pay attention to this website and we will push it to you every day
.
