What are the precautions in the use of sand and gravel separator?

What are the precautions in the use of sand and gravel separator? 1.
At present, the transport vehicles of many mixing stations are social vehicles, and the mobility of personnel is relatively large, which makes the management of our mixing stations more difficult.
The discharging is not operated according to the regulations, which causes the material blockage, which leads to the incomplete discharge of the punching chute.
work
.

2.
If there is residual material in the mixer truck, if the driver still follows the originally set procedure, it is easy to cause material blockage or even damage to the separator equipment, because the originally set procedure is for normal transportation.
To operate, if the cleaning time is shortened, such as cleaning for only 10 minutes, it is obviously unable to meet the requirements for cleaning and separation of residual materials.
Therefore, special personnel must be required to operate, change the automatic to manual, and carry out standardized operations.
The material is completely separated, and after the separation is completed, it is transferred to the automatic program.
Only in this way can the correct operation ensure the normal operation of the separator without beating the material.
The damage of the separator in most of the mixing plants is caused by this
.

3.
Regular cleaning and discharging of the waste discharge port of the sand and gravel separator.
In use, the sewage outlet should be cleaned every other month to prevent the sludge from caking and blocking the sewage outlet.
Especially in winter, the sewage outlet should be cleaned regularly
.

In addition, there are several points to pay attention to: (1) Before the start of the test run, you must pay attention to whether there are foreign objects in the auger and the stone divider.
If there is, it should be cleaned and eliminated in time
.

(2) When the separator is completed after each shift, the operator should clean the main equipment once
.

(3) When the main equipment of the sand and gravel machine stops working in each shift, it is necessary to check whether the trommel screen of the gravel machine in the machine is clean in time, and it is required that no debris is blocked
.

(4) When the sand and gravel machine equipment stops working in each shift, the cage pieces in the machine should be checked in time.
If there is dead pulp or hard blocks on the pieces, they should be disposed of in time to ensure that there is no debris blocking
.

(5) When running the host equipment in winter, the heating equipment should be checked in time to avoid freezing of the equipment, so as not to affect the normal operation and separation effect of the host equipment
.

(6) When the main equipment of the sand and gravel machine stops working in each shift, the accumulated material in the separator must be washed to prevent the next start difficulty due to concrete curing, and even damage to the motor and the main shaft of the sand separator
.

(7) When separating a large amount of concrete, the cutting should be carried out gradually and not excessive, so as not to affect the separation effect
.