-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
What precautions should be taken when using the CO2 incubator (1) Regularly check the over-temperature safety device to prevent over-temperatur.
The method is to press the monitoring alarm button, turn the fixing screw until the over-temperature alarm device rings, and then turn off the over-temperature safety ligh.
(2) The added water must be distilled water or non-ionized water to prevent minerals from accumulating in the water tank and causing corrosio.
The water must be changed every yea.
Always check that there is enough water in the tan.
(3) The inside of the box should be regularly scrubbed and disinfected with disinfectant, and the shelf can be taken out for cleaning and disinfection to prevent other microbial contamination, resulting in the failure of the experimen.
(4) If carbon dioxide is not used for a long time, the CO2 switch should be turned off to prevent the CO2 regulator from malfunctionin.
(5) The CO2 used must be pure, otherwise the sensitivity of the CO2 sensor will be reduced and the CO2 filter device will be pollute.
(6) The incubator should be managed by a special perso.
Once any switches and adjustment knobs on the operation panel are fixed, do not arbitrarily Twist, so as not to affect the temperature, CO2, humidity fluctuations in the box, and reduce the sensitivity of the machin.
(7) In an incubator without humidity control, in order to maintain the stability of CO2 in the box, a container containing water should be placed at the bottom of the bo.
There is also a three-gas incubato.
This incubator is a new product that is further improved on the basis of the carbon dioxide incubato.
The principle is the same as that of other incubator.
The characteristic is that not only CO2, but also nitrogen and oxygen can be added, and the content of various gases is controlled and adjusted by compute.
The method is to press the monitoring alarm button, turn the fixing screw until the over-temperature alarm device rings, and then turn off the over-temperature safety ligh.
(2) The added water must be distilled water or non-ionized water to prevent minerals from accumulating in the water tank and causing corrosio.
The water must be changed every yea.
Always check that there is enough water in the tan.
(3) The inside of the box should be regularly scrubbed and disinfected with disinfectant, and the shelf can be taken out for cleaning and disinfection to prevent other microbial contamination, resulting in the failure of the experimen.
(4) If carbon dioxide is not used for a long time, the CO2 switch should be turned off to prevent the CO2 regulator from malfunctionin.
(5) The CO2 used must be pure, otherwise the sensitivity of the CO2 sensor will be reduced and the CO2 filter device will be pollute.
(6) The incubator should be managed by a special perso.
Once any switches and adjustment knobs on the operation panel are fixed, do not arbitrarily Twist, so as not to affect the temperature, CO2, humidity fluctuations in the box, and reduce the sensitivity of the machin.
(7) In an incubator without humidity control, in order to maintain the stability of CO2 in the box, a container containing water should be placed at the bottom of the bo.
There is also a three-gas incubato.
This incubator is a new product that is further improved on the basis of the carbon dioxide incubato.
The principle is the same as that of other incubator.
The characteristic is that not only CO2, but also nitrogen and oxygen can be added, and the content of various gases is controlled and adjusted by compute.
