What are the precautions for daily cleaning of small dose liquid filling machines

The main performance characteristics of small dose liquid filling machine: 1, man-machine interface and PLC communication, debugging equipment or replacement varieties only need to be set
on the screen.
Bottle feeding, positioning, filling and sealing, bottle out, labeling fully automatic
.
2, the use of imported digital display table and encoder, filling capacity is directly reflected in the
control board.
3, soft start: the whole machine starts without impact, the operation from low speed to high speed, will not break the bottle injury machine
.
4.
After the filling amount is adjusted once, each volume cylinder can be adjusted in small quantities, and the filling accuracy is high and the consistency is good
.
5.
Automatic protection: overload clutch protection device is provided at the inlet and outlet bottle dial, and the abnormal situation automatically stops alarming
.
6, a wide range: adapt to a variety of special-shaped bottles and bottles of different diameters of the filling; The middle pillar is adjustable and does not require replacement parts to meet the filling
of bottles of different heights.
7.
When the bottle is not in place during filling, the bottle is blocked or the outlet pipe is not inserted into the bottle, the equipment will automatically protect and continue to work
after elimination.
Daily cleaning of small dose liquid filling machine: 1, keep the automatic liquid filling machinery pipeline clean, all pipelines, especially the pipelines in indirect or direct contact with the material, should be kept clean, brush every week, to ensure that the automatic liquid filling machinery is clean, the material tank should be brushed to ensure that the part in contact with the material can not have dirt and bacteria
.
2.
Before each work of the automatic liquid filling machinery, the temperature of the filling machine tank and the conveying pipeline should be reduced with 0~1 °C of water, and when the filling temperature exceeds 4 °C, the temperature should be reduced first before the filling operation
.
The use of insulation tank, constant temperature filling, so that the material in the filling of the specified time to maintain a certain constant temperature, so as not to cause the automatic liquid filling machinery due to excessive temperature changes and unstable
work.