What are the factors that cause the damage of the online thermometer?

What are the factors that cause the damage of the online thermometer? The first: the humidity factor
.

Infrared thermometers usually, some moisture, rain, dew, etc.
are all factors that cause humidity.
Dew formed by moisture is the main factor for outdoor humidity.
Dew is more harmful than rain because it adheres to the material.
longer, causing more severe moisture absorption
.

For example, the wood coating is washed away by rainwater to remove the surface aging layer, and the unaged inner layer is exposed to sunlight, resulting in further aging
.

In the infrared thermometer simulation test, the damage mechanism of the composite material caused by the humid environment has been clearly studied
.

Taking the diffusion of water to carbon fiber epoxy resin laminates as an example, the aging mechanism of the composite material in humid atmospheric environment is explained
.

The second: lighting factor
.

The structure and composition of different products of infrared thermometers also have different effects on the intensity of light
.

For example, plastics, coatings, etc.
, these product materials will not produce serious aging phenomenon when exposed to light
.

Therefore, it is necessary to analyze what the material composition of the product equipment is
.

 　　The third: high temperature factor: When the ambient temperature increases due to high temperature, the intensity of light and the degree of damage will increase
.

There is no direct chemical reaction between temperature and light, but there is a subtle connection between them
.

So when testing programmable infrared thermometer products
.

 　　These three factors are critical to the impact of product equipment, and any one of them can quickly shorten the service life of the thermometer
.

 　　Infrared thermometer studies have shown that the water-induced reduction in the modulus of epoxy resins is reversible
.

When the external environment changes and the moisture diffuses out, the film amount of the resin can almost return to its original value
.

However, for many processes of water absorption, the property change caused by water is irreversible
.

The irreversible changes will lead to a significant decrease in the physical and mechanical properties of the material, and at the same time programmable infrared thermometers to simulate a humid atmospheric environment can detect the properties of the material
.

Therefore, we should pay more attention to the details when operating the online thermometer, so that we can use this kind of instrument.
The above is the relevant introduction about the factors that lead to the online thermometer.
I believe that you will have a corresponding understanding of this after reading it.
When using, try to avoid these factors as much as possible, and hope to help everyone
.