What are the common faults of automatic filling machines

Although the failure of the automatic filling machine is not a common thing, there will be some small failures in the machine, especially if the equipment has been used for a long time
.

It is good that a small fault in the automatic filling machine can be solved in time.
If it is a major fault, it will not be solved for a while and it will inevitably prolong the production cycle and reduce the production efficiency
.

1.
PLC fault of automatic filling machine PLC common faults such as invalid cylinder reset, solenoid valve coil can not be powered off, PLC sends a stop signal to the motor and does not stop, must be powered off to stop the filling machine motor
.

If such problems occur, professional development engineers are required to deal with such problems, and modifying the program is also a way to deal with them.
2.
The filling of the automatic filling machine is not accurate and the material will not be discharged.
1.
The filling is inaccurate or not The first thing to do is to check whether the filling nozzle is blocked by foreign objects.
This is very simple to clean up
.

If the filling nozzle is damaged, it should be replaced with a new filling nozzle in time
.

2.
Check whether there is air in the conveying pipe of the filling machine, and if there is, remove the gas
.

 　　3.
Check all sealing rings, replace them in time if they are aged or damaged
.

 　　4.
Adjust the filling speed.
The filling speed will affect the filling accuracy.
5.
The material of the material trough of the filling machine is insufficient, and new materials can be added.