What about the noise generated by the xenon lamp aging test chamber?

Because some users' xenon lamp aging test chambers are used in laboratories and offices, they pay more attention to the noise generated by the equipment, and they are worried that excessive noise will affect the status
of other staff.

However, sometimes the noise of the xenon lamp aging machine is not caused by the equipment itself, and sometimes it may be caused by the operator not preparing in advance, so we need to prepare in advance
.

1, the placement environment: xenon lamp aging test machine instructions also said that the equipment should be placed in a stable place to use, but if not installed according to the requirements, the equipment may make noise
in the process of use.

Of course, if other installation requirements cannot be met, there may be other problems
that affect the use.

2, the compression cylinder problems, this is more difficult to avoid, because after a long time of use of accessories failure is very likely to happen, and this situation to replace the compressor of the equipment can be solved
.

3, the aging and loosening of accessories is also the cause of equipment noise, and this situation requires the manufacturer to contact the maintenance personnel of the test box manufacturer to solve the problem, otherwise the test results obtained by the equipment are inaccurate or cannot be tested
at all.

If the equipment makes abnormal noise during the xenon lamp aging test machine test, it is still necessary to stop immediately and contact the operator to avoid bringing more serious situations to the
equipment.