-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Under normal circumstances, acetic-acrylic and styrene-acrylic copolymer emulsions with higher glass transition temperatures on the market require the use of solvents or film-forming aids to reduce the minimum film-forming temperature (MFFT) to the temperature required for film-forming
.
Due to the use of VAE technology, the film-forming temperature of VINNAPAS® EP 618 is lower than that of similar products in the market, so it only needs less film-forming additives to achieve the required performance
.
Compared with the standard acrylic emulsion with higher glass transition temperature, VINNAPAS® EP 618 can not only reduce the cost of raw materials, but also reduce the VOC content and improve the cleanness, so that the formula can meet the requirements of HJ2537-2015 (VOC<50g/l ) And JG/T481-2015 (VOC≤20g/l) environmental safety standards
.
In addition, in the production process of VINNAPAS® E P618, raw materials containing alkylphenol polyoxyethylene ether (APEO) are not used, so it is an excellent choice for manufacturers who pay attention to environmental protection standards for coatings
.