Veterinary drug production spray drying tower LPG-100

Veterinary drug production spray drying tower LPG-100 green high efficiency veterinary drug production spray drying tower, including the base, the base of the base is fixed on all sides of the support leg, and the bottom of the support leg is provided with a rubber pad, the middle end of the base top is fixed with a drying tower body, the bottom of the right side of the drying tower body is provided with a two air inlet, the left end of the base top is fixed with a dust box, the right end of the base top is fixed with a heat sink, the upper end of the left side of the heat sink cavity is fixed with a support plate, The top of the support plate is fixedly installed with a pump, and the input end of the pump runs through the inner surface of the heat sink and extends to the inner cavity of the drying tower body, the middle end of the left and right sides of the heat sink cavity is fixed with a refrigeration rod, and the lower end of the left side of the heat sink cavity is opened with an air inlet
.

The bottom of the right side of the heat sink is fixedly installed with a motor, the output of the motor is fixedly connected to the hinge, the left side of the hinge is fixedly installed with a fan
.

The right end of the bottom of the dust collector chamber is fixedly installed with two pumps, and the input end of the two pumps runs through the inner surface of the dust collector and extends to the inner cavity of the drying tower body, the upper and lower sides of the dust collector chamber are opened with chutes, and the inner cavity of the chute slides connected to the filter
.

A kind of green high-efficiency veterinary drug production spray drying tower, including the base 1, the base 1 bottom of the four sides are fixed with support legs 8, and the bottom of the support leg 8 is provided with rubber pads, by setting the rubber pad, the device as a whole can have a non-slip effect, the middle end of the base 1 top is fixed with the dry tower body Dry tower body 4 The bottom of the right side of the dry tower body is opened with a two air inlet 16, and the left end of the base 1 top is fixed with a dust box 2, The right end of the bottom of the dust collector box 2 inner chamber is fixedly installed with two pumps 15, and the input end of the two pump machine 15 runs through the inner surface of the dust collector 2 and extends to the inner cavity of the drying tower body 4, the upper and lower sides of the dust collector 2 inner chamber are opened with chute 17, the inner chamber sliding of the chute 17 is connected to the filter 19, the bottom of the left side of the dust collector 2 is opened with an exhaust port 18, the left end of the positive surface of the dust collector 2 is installed through the hinge activity with the box door 3, and the dust in the inner cavity of the drying tower body 4 is sucked in through the input end of the second pump machine 15.
Then through the output end of the two pump machine 15 to transport the dust to the surface of the filter 19, to achieve the effect of dust removal, the right end of the top of the base 1 is fixed with a heat sink 6, the bottom of the right side of the heat sink 6 is fixed with a motor 7, the output end of the motor 7 is fixed to the shaft 13, the left side of the shaft 13 is fixed with a fan 14, through the output end of the motor 7 to drive the shaft 13 rotation, the shaft 13 rotates at the same time as the fan 14 rotates, can improve the air velocity flow in the inner cavity of the radiator 6, The top of the heat sink 6 is fixed with the battery box 5, the bottom of the battery box 5 inner chamber is fixed with a battery 20, by setting the battery 20, the device can be powered, the right side of the battery box 5 is provided with a charging hole 21, the upper end of the left side of the heat sink 6 inner chamber is fixed with a support plate 12, the top of the support plate 12 is fixed with a pump 11, and the input end of a pump 11 runs through the inner surface of the heat sink 6 and extends to the inner cavity of the drying tower body 4, The cooling rod 10 is fixed at the middle end of the left and right sides of the radiator 6 inner chamber, and the lower end of the left side of the radiator 6 inner chamber is opened with an air inlet 9
.