-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Vacuum bowl filters Bowl bowls and vacuum filters are used in starch and gluten dehydration processes and in syrup lighting processes, the so-called pre-coated filtration
.
The company has extensive experience in optimizing the filtration process in the corn wet mill industry, with final filtration products reaching high levels
of quality and performance.
Belt vacuum filter to filter cloth as the filter medium, is to make full use of material gravity and vacuum suction to achieve solid-liquid separation of efficient separation equipment, the use of the overall ring rubber belt as a vacuum chamber ring tape by the motor drag continuous operation, filter cloth spread on the tape and synchronous operation, tape and vacuum slide, on the ring friction belt contact and form a water seal, the slurry by the cloth evenly distributed on the
filter cloth.
When the vacuum chamber is connected to the vacuum system, a vacuum extraction area is formed on the tape, the filtrate passes through the filter cloth through the horizontal groove on the tape and summarizes and enters the vacuum chamber by a small hole, the solid particles are intercepted on the filter cloth to form a filter cake, the liquid entering the vacuum chamber is discharged by the soda separator, and with the movement of the rubber belt, the filter cake has been formed into the filter cake washing area and the washing drying area in turn, and finally the filter cloth is separated from the tape, and the filter cake is unloaded at the discharge shaft, and the filter cloth that is removed from the filter cake is cleaned to obtain regeneration.
After passing through a set of support shafts and guiding devices, it re-enters the filter area and begins to enter a new one-pass zone
.