This article analyzes the difference between a two-dimensional motion mixer and a three-dimensional motion mixer?

The barrel of the three-dimensional motion mixer has multi-directional operation, which accelerates the flow and diffusion of various materials during the mixing process, and avoids the material gravity segregation and accumulation phenomenon caused by centrifugal force in general mixers, and there is no dead angle in mixing.
, can effectively ensure the good quality of the mixed material
.

The equipment is suitable for high uniformity mixing of powdery and granular materials in pharmaceutical, chemical, food, light industry, electronics, machinery, mining and metallurgy, national defense industry and scientific research units
.

The following editor will briefly introduce to you what are the differences between the three-dimensional motion mixer and the two-dimensional mixer in terms of use and structure? As shown below: From the application point of view: The rotating drum of the two-dimensional motion mixer can move in two directions at the same time, one rotating drum rotates, and the other rotating drum swings with the swing frame
.

When the mixed material rotates, turns and mixes with the drum in the drum, it also moves back and forth with the swing of the drum.
Cone vacuum dryer for thorough mixing
.

EYH series two-dimensional motion mixer is widely used in the mixing of dry powder and granular materials
.

The three-dimensional motion mixer is widely used in pharmaceutical, chemical, food and scientific research units to uniformly mix different materials such as powder or paste
.

The parts in contact with the material are made of stainless steel.
The two ends of the stirring shaft are provided with sealing devices to prevent the material from leaking out.
The stirring shaft is driven by the reducer to stir the material evenly at 24r/min.
Press the operation button to tilt the tank body by 90 degrees
.

 　　From the structural point of view: The two-dimensional motion mixer is mainly composed of three parts: drum, swing frame and frame
.

The drum is mounted on the swing frame, supported by four rollers and axially positioned by two stop wheels.
Among the four supporting rollers, two of the rotating wheels are dragged by the rotating power system to make the drum rotate; swing; The frame is mounted on the frame by a set of crank swinging mechanism, and the swing frame is supported on the frame by the bearing assembly
.

 　　Driven by the driving shaft, the cylinder of the three-dimensional motion mixer performs compound movements such as translation, rotation and tumbling, which promotes the material to make a three-way compound movement along the cylinder of the low-temperature vacuum drying box, so as to realize the mixing of various materials.
Mutual flow, diffusion, accumulation, doping, in order to achieve the purpose of uniform mixing
.