The working principle of the main component structure of oral liquid filling machine

Oral liquid filling machine is a filling equipment
specially designed for new oral liquid bottles.
The design is reasonable, the structure is simple, the operation is convenient and equipped with a mechanical bottle shortage stop filling device
.
Oral liquid filling machine with inner plug, outer lid plastic bottle design, using rotary drum dial to manage the bottle, peristaltic pump filling, cylinder flushing, compact design, reasonable mechanism, high
degree of automation.
The following is a brief introduction to the working principle of the main components of the oral liquid filling machine, as follows: 1.
Tracking filling mechanism: the servo motor drives the gear and rack movement, thereby driving the needle to do reciprocating motion
.
By adjusting the relative position of the needle spray holder and the mounting frame, the needle can be accurately inserted into the middle of the bottle mouth 2.
The principle of the filling part: the oral liquid bottle is sent from the bottle feeding wheel to the transition wheel, and then sent to the timing belt by the transition wheel, and the bottle is dragged forward at a uniform speed by the insert on the timing belt, and the needle is inserted into the bottle mouth under the control of the tracking mechanism to run forward synchronously with the bottle to achieve tracking filling
.
The latent needle rises as the liquid level rises, acting as a defoamer
.
3.
Transmission principle: the motor transmits the power to the worm gear shaft of the reducer through the pulley, and then the worm gear shaft passes through each gear to transmit the power to the wheel shaft and filling part and the capping head
.
The filling part, the capping head and each wheel act synchronously, and the power is transmitted to the bottle feeding wheel device
through the bevel gear.
4.
Capping head: After the oral liquid bottle wears the cap and enters the capping head turntable, the three rolling knives that have been opened will be centered on the bottle, rotate forward with the turntable, and press the lid under the control of the cam, at this time, the three rolling knives roll to the lid at the same time under the action of the cone sleeve, and after rolling, they leave the lid at the same time and return to the original position
.
5.
Cover supply system: it is composed of
a cover track, a cover head and a cap-wearing mechanism.
The capping head adopts the principle of electromagnetic spiral oscillation, the messy lid is sorted out and queued, and enters the capping track through the reversing twist channel, and when passing through the capping mechanism, the lid is hung by the bottle through the gland plate to make the lid straight
.