The working principle and use of the anaerobic incubator

The anaerobic incubator is a device for bacterial culture and manipulation in an anaerobic environment, which can cultivate anaerobic organisms that are difficult to grow, and can avoid the danger of death from the previous anaerobic organisms in the atmosphere when they are exposed to oxygen
.

Structural features: The product is composed of a culture operation room, a sampling room, a gas path and circuit control system, a wax melting sterilizer and other parts
.

The temperature control system adopts high-precision digital explicit thermometer, which can accurately and intuitively reflect the actual temperature in the box, coupled with an effective temperature limit protection device, safe and reliable
.

The box is equipped with ultraviolet germicidal lamps, and the gas enters the box after filtering, which can effectively avoid bacterial contamination
.

The misguided device can adjust the flow rate arbitrarily and can input various gases
at will.

The operating chambers are made of
stainless steel plates.

Its front window is made
of transparent stamping-resistant special glass.

The operation uses gloves, reliable, comfortable, flexible and easy to
use.

The operating room is equipped with a special inoculation stick sterilizer, a molten wax disinfection device, and an oxygenation catalyst
.

Operation method: The operator puts his hand into the operation room and closes the closed door
of the operation room and the sampling room.

Open the closed door of the sampling chamber, place the Petri dish into the sampling chamber, and close the closed door
of the sampling chamber.

Place the Petri dish in the incubator of the operating chamber, and the closed door between the operating chamber and the sampling chamber is obscured
.

Adjust the temperature so that the temperature of the incubator in the operating room reaches the required temperature
.

Fill the nitrogen and mix the gas more than
three times each.

Check the operating system
.

Note: It is forbidden to open the door, glove mouth gland or remove and repair
it in a vacuum state.

The built-in power supply is 220V, 50Hz, 1KW
.

Gloves should be vacuumed before or at the same time as the box, and then stopped vacuuming before or at the same time as the box
.

The external air source pipe fittings should be adapted, the plug should be sealed firmly, and the zero pressure should not exceed the zero pressure or 1 atmosphere when inflating