The trouble of sealing machine and its solution

It is economical, fast and easy to adjust to seal the cartons with instant adhesive tape It can seal the cartons up and down at one time It can also use printing tape to improve the product image It is the automatic packaging enterprise The key component of the sealing machine is the driving motor The higher the motor power, the better 1 The clamping nail of the case sealing machine moves too slowly or the stroke of the clamping nail is insufficient: the bolt is loose, the front buckle or the inner plate of the board machine is worn, at this time, the bolt can be tightened, Pay attention to the correct position of the front buckle, or replace the front buckle or the inner plate of the board machine After the above actions are completed, test its functions If the stroke is too short, fine tune the front buckle up, and if the action is slow, fine tune the front buckle down; 2 Air leakage at the piston rod: the bottom ring of the main body is damaged, then replace the ring; 3 Air leakage at the exhaust port: The on-off valve ring or switch seat ring is damaged or the piston ring is damaged Replace the ring; 4 Air leakage at the trigger: the on-off valve ring or switch seat ring is damaged Replace the ring; 5 The drive ring is loose and cannot be located: the plastic steel strip and the drive spring are inelastic Remove the plate machine combination and reinstall the spring tip or replace the plastic steel strip and the drive spring This article was / edited by