The solution to the easy failure of oral liquid filling machine

Oral liquid filling and capping machine is specially designed for 10-20ml oral liquid straight tube bottle.
It adopts glass piston pump for volumetric metering, high filling accuracy, stable performance, low bottle breakage rate, small footprint, and electromagnetic vibration.
Cap, centrifugal capping, filling and sealing in one
.

The 10-20ml automatic oral liquid filling and capping machine has three specifications for you to choose from.
It is an ideal filling equipment for pharmaceutical factories, hospitals, health care products factories and other industries.
The equipment is produced in accordance with the new version of GMP standards
.

1.
What should I do if the cylinder piston of the small oral liquid filling machine does not move? 1.
Confirm whether the safety emergency stop switch is safe; 2.
Confirm whether the air source switch is turned on; 3.
Confirm whether the one-way signal valve is damaged
.

2.
What to do if the cylinder piston of the oral liquid filling machine does not return after being pushed to the top? For such a phenomenon to occur, it is necessary to confirm whether the moving target of the filling machine is in contact with the one-way valve
.

　3.
What should I do if the filling volume of the small oral liquid filling machine is inaccurate or does not produce material? 1.
Confirm whether the throttle valve is closed; 2.
Increase the pumping speed of the cylinder; 3.
Confirm whether the tee is locked by the clamp; 4.
Confirm whether there is enough material in the storage box; 5.
Confirm whether the connection is sealed
.

　　4.
How to deal with the material flowing out of the back end of the material tank from the oral liquid filling machine? 1.
Check whether the sealing ring on the piston is worn, and replace it if worn; 2.
Confirm whether the piston and the piston rod are tight
.