The role of the pressure controller of the high and low temperature integrated thermostat in the pharmaceutical and chemical industries

Enterprises using pharmaceutical and chemical high and low temperature integrated thermostats should regularly check the pressure controller to ensure that the operation of pharmaceutical and chemical high and low temperature integrated thermostats is within the normal pressure range without overload operation, so as to avoid various accidents.

.


When the pharmaceutical and chemical high and low temperature integrated thermostat is in operation, the pressure controller will be placed in different positions of the equipment.
The pressure controller will be placed in different positions, and the pressure will be different.
If you want to eliminate the situation that the pressure is too large or the pressure is too small The emergence of power-off protection, the equipment will reduce this gap through power-off protection, so that the probability of equipment problems can be reduced as much as possible.
For stable operation, it is necessary to ensure that the pressure scale is within the normal scale.
It is usually necessary to do a good job in protection, and the technicians should also pay attention
.

In common pharmaceutical and chemical high-low temperature integrated thermostats, the compressor is the heart of the refrigeration system.
It inhales low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and discharges high-temperature gas to the exhaust pipe.
The high-pressure refrigerant gas provides power for the refrigeration cycle, thereby realizing the refrigeration cycle
.

Before starting the high and low temperature integrated thermostatic machine for medicine and chemical industry, the nozzle on the stuffing box should be injected with water to lubricate the rubber bearings.
After the pump is out of water, it can be turned off.
The water and oil roads are unobstructed
.

 　　Before starting the high and low temperature integrated thermostatic machine for medicine and chemical industry, check that there should be no looseness in all connecting parts, and turn the coupling by hand to see if it is flexible and whether there is any noise in the pump
.

 　　When the high and low temperature integrated thermostatic machine of pharmaceutical and chemical industry is started, no one should stand beside the machine.
After starting the machine, you should stand by the machine for at least five minutes to check the equipment condition.
Leave the pump immediately after operation
.