The main application channels of liquid stirring tank and its installation precautions

Liquid mixing tank can also be called aqueous tank, widely used in coatings, medicine, building materials, chemicals, pigments, resins, food, scientific research and other industries
.

The equipment can be made of carbon steel, stainless steel and other materials according to the industrial requirements of the user's products, as well as set up heating and cooling devices to meet different process and production needs
.

The electric heating form has the characteristics of jacket heating, coil heating, reasonable structural design of the equipment, advanced technology, durable, and large heating area, high thermal efficiency, uniform heating, short boiling time of quasi-material, easy control of heating temperature, etc.
, which is the ideal chemical equipment
with less investment, fast production and high returns.

Installation method: 1, check whether there is serious damage and serious deformation of the mixing tank during transportation, and check whether the fasteners of the equipment are loose
.

2.
The equipment is installed
horizontally on a solid foundation by burying anchor bolts.

3.
Under the guidance of professionals, carry out the correct installation of equipment, electrical control devices and accessories, and check whether the pipeline is smooth, whether the installed instrument is correct, and whether there is damage
.

Before starting the device, please check whether there are people or objects that affect the normal operation of the equipment inside and outside the device to avoid danger
.

4.
After installation, please first carry out a trial run for a few seconds to determine that there is no electrical short circuit or no abnormal sound, and then a short time of trial rotation can be carried out
.

5.
If the liquid mixing tank is equipped with a mechanical seal, the machine seal lubrication tank must be injected with an appropriate amount of 10# or sewing oil before the host starts, and the machine seal cooling chamber must be fed with cooling water so that the machine seal device can be well lubricated and cooled
.

The machine seal is not adjusted at the factory, and the machine seal is adjusted to the position according to the installation instruction manual after installation, so that it can operate normally
.

6.
After the normal operation of the liquid mixing tank equipment, please check the bearing temperature, running smoothness, sealing, etc.
, and whether the instrument is normal, and confirm that it can be fed and run
after confirming normal.

The material of the mixing tank is generally the use of wear-resistant high-strength steel plate, when the shape of the mixing tank is formed, remove the inner brace, weld the blade.


The material of the blade is generally made of high-wear-resistant steel, and the mixing quality and discharge speed are combined
.

The welding process adopts carbon oxide protective film, and the mixing tank is shot blasted after production, which eliminates the stress generated during welding and production, and also increases the adhesion of the paint
.