The key points for selecting the capacity size of the high and low temperature test chamber

Most customers in the selection of high and low temperature test chamber is full consideration of the capacity size of the test chamber, because the capacity of the high and low temperature test chamber will cause excess costs, too small capacity will cause the experimental results to not meet the regulations, which makes customers in the purchase of high and low temperature test chamber is very headache, so Liuqin Technology said about the key points
of the selection of high and low temperature test chamber capacity size 。 In order to inspect the test products in the high and low temperature test chamber, the surrounding atmosphere of the test can meet the standard requirements of the experiment, and the capacity size of the high and low temperature test chamber should conform to the following: 1.
The volume of the test product cannot exceed 35% of the reasonable working indoor space of the high and low temperature test box, and if it is a hot test product, do not exceed 10%.

2.
The total area of the test product in the high and low temperature test chamber and the total area of the personal studio on the cross-section cannot exceed 50%.

3.
In order to maintain the uniformity of the temperature circulation system in the high and low temperature test chamber, the outer outline area of the test product and the inner wall of the test chamber are maintained at a distance
of 100-150mm.
The above is the key point of selecting the capacity size of the high and low temperature test chamber interpreted by Liuqin Technology for everyone, and we look forward to assisting you
.