The Instruction of Sodium houttuyfonate

Sodium hydroxide, also known as lye, is a strong alkali that is commonly used in the chemical industry for a variety of purposes, including the production of soaps, detergents, and other cleaning products.
Sodium hydroxide is usually sold as a solid, but it is also commonly used as a concentrated aqueous solution.
In some cases, it may be necessary to dilute sodium hydroxide solutions to a certain concentration before using them in a particular process.

One way to dilute a sodium hydroxide solution is using a compound called sodium hydroxide 20%.
This compound is a liquid that is used to dilute strong aqueous solutions of sodium hydroxide to a lower concentration.
Sodium hydroxide 20% is a popular choice for this purpose because it is easy to handle and has a relatively low concentration of sodium hydroxide.

To use sodium hydroxide 20%, you will need to follow these steps:

1. Measure the amount of sodium hydroxide you need to dilute.
   This will depend on the concentration of the original solution and the desired concentration of the diluted solution.
   
2. Add the sodium hydroxide 20% to the original solution in small increments, stirring constantly.
   Be careful not to splash the solution, as it can be caustic.
   
3. Continue adding the sodium hydroxide 20% and stirring until the desired concentration is reached.
   
4. Allow the diluted solution to sit for a few minutes to allow the components to fully dissolve.
   This will ensure that the solution is clear and free of any undissolved solids.
   
5. Filter the solution if necessary.
   This is especially important if the diluted solution will be used in a process that requires a clear, sediment-free solution.
   

Using sodium hydroxide 20% to dilute a sodium hydroxide solution is a simple and effective way to reduce the concentration of the solution without losing any of its effectiveness.
It is important to be careful when handling sodium hydroxide, as it is a strong alkali that can cause burns and other injuries if proper precautions are not taken.

In summary, using sodium hydroxide 20% to dilute a sodium hydroxide solution is a safe and effective way to reduce the concentration of the solution without losing any of its effectiveness.
This product is widely used in the chemical industry and is an important tool for many different processes.
By following the steps outlined above, you can easily dilute a sodium hydroxide solution to the concentration you need for your specific process.