The electronic weighing module is really simple in structure and does not take up space

Compared with mechanical scales, electronic scales are small in size, low in cost, light in weight, simple in structure, easy to operate, convenient for later maintenance, and can be used in various environment.
Their weight signal can be transmitted remotely, and a digital display of the weight can be realize.
They can be networked with computers to automate the process of production and increase the productivity of enterprise.
The electronic weighing module can be divided into three modules, namely acquisition module, controller module and display modul.
The acquisition module is composed of A/D conversion, pressure sensor and signal processin.
The sensor collects the signal, converts the gravity signal into a digital signal through /D conversion, and then inputs it to the controller modul.
The controller processes the digital weight data and transmits it to the display modul.
In this way, the exchange of information between humans and machines is complete.
The weighing module is often called a load cell, which should belong to the analog contro.
Changes in external pressure cause changes in the resistance of the strain gauge, output current or voltag.
Of course, this is just one type of load cel.
The types of sensors include: phase change meters, piezoelectric crystals, varistors,et.
However, the products actually used are of modular design, which is safe and convenien.
After the module is installed, the weighing system is calibrated and automatically controlled by means of fixed, semi-floating, and full-floatin.
The electronic weighing module is a practical structural accessory for the weighing instrument senso.
It consists of top plate, bottom plate, load cell, load support column and support bolt.
According to the different load-bearing columns and top plates, it can be divided into three types: fixed, semi-floating and floatin.
In a weighing batching system, one fixed module and one semi-floating module are used, and the rest are supplemented by floating modules, generally divided into a group of three and a group of fou.
A set of three is used for three-point support, and a set of four is used for four-point suppor.
Weigh modules can be easily installed on containers of various shape.
It is suitable for retrofitting existing equipment, be it vessels, hoppers or reactor.
With the weighing module, it can become a weighing syste.
Compared with the existing electronic weighing instrument, the electronic weighing module is not limited by the site, flexible in assembly, convenient in maintenance and low in pric.
Since the floor scale has a weighing platform, it requires a certain floor space, and the weighing module is installed on the support point of the container, so there is no need to increase the floor spac.
It is especially suitable for the situation where multiple containers are installed in parallel and the site is narro.
The range and division value of the electronic weighing instrument have certain specification.
For the weighing system composed of weighing modules, its range and division value can be set as required within the allowable range of the instrumen.
The weigh module is easy to maintain, and if the sensor is damaged, the support screws can be adjusted to jack up the weighing bod.
Sensors can be replaced without removing the weigh modul.

In addition, due to the simple structure of the weighing modules, the investment of the weighing system composed of the weighing modules is les.