The daily maintenance of the automatic capping machine is very important

The automatic capping machine is a kind of sealing equipment, and it is also a single machine with very high precision among the three-in-one machines
.

The machine is very convenient to operate and adjust.
The operator only needs to put the bottle cap on the bottle mouth, and the bottle cap screwing head will be automatically tightened when the bottle is running forward
.

Beautiful appearance, dexterity, fast capping speed, high qualification rate, suitable for different bottle caps in food, pharmaceutical, daily chemical, cosmetics and other industries
.

Regardless of the description of the equipment, if it is used for a long time and does not pay attention to maintenance work, it will not be able to play its normal working level, and even failures and shutdowns often occur, and the capping machine is no exception
.

Therefore, users should have a certain understanding of the maintenance knowledge of the automatic capping machine, which can not only prolong the service life of the machine, but also reduce the frequency of machine failures and improve the quality of equipment capping
.

The daily maintenance of the automatic capping machine has the following three points: 1.
After purchasing the automatic capping machine, the operators should be strictly trained, and non-technical personnel should not be allowed to debug the machine, so as to reduce the failure of the capping machine, which can greatly reduce the occurrence of capping machine failures.
Extend the life of the equipment
.

At the same time, it is necessary to ensure that the power supply is normal and there is a ground wire before use.
If the voltage is unstable, it will cause considerable damage to the capping machine
.

2.
Before the capping machine works, the user can use a non-woven soft cloth and cleaning agent to wipe off the oil or dirt, and then dry it
.

Regularly clean up the fully automatic capping machine, and regularly add lubricating oil to each component of the capping machine to reduce frictional resistance, make the mechanical operation of the capping machine smoother and faster, improve the operation quality of the entire production line, and realize assembly line operations.
"All in one go"
.

 　　3/ After the capping machine is used, the cleaning of the equipment cannot be ignored
.

The user should keep the surface of each electrical contact clean to avoid materials, oil temperature, dust and other factors that affect the sensitivity of the subsequent capping machine
.

At the same time, the user should also clean the rubber wheel and the toothed belt of the bottle frequently, and try not to get any grease or dirt.