-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
How to do a good job of sealing the tubular centrifuge? Under normal circumstances, the cover of the tubular centrifuge is turnable, so there must be a solid sealing treatment in the local area where it is connected to the casing
.
It is conceivable that if the sealing structure of this orientation fails, it is likely to constitute the loss of centrifugal medium, which will pose a series of hazards to people and the environment, and the centrifugal medium itself will also constitute a very serious pollution
.
In addition, the installation interface of additional equipment such as feed tubes, washing tubes and observation mirrors should also be firmly sealed
.
Second, do a good job in the sealing treatment of bearing orientation The sealing treatment of the traditional tubular centrifuge on the spindle nut and bearing position is very simple, and it can only be said that it has a relative sealing effect, and the sealing effect that can be played is also very limited
.
With the continuous development of tubular centrifuge skills, the sealing processing skills in this area have also advanced a lot, and the sealing treatment of bearing orientation can also be done very well
.
For example, in the part of the spindle nut, the orientation of the spindle nut and the drum joint surface can be set up with some sealing rings, so that the tubular centrifuge will not have some pollutants entering the
medium during operation.
