Talking about the British Shore Portable Dew Point Meter SADP

Talking about the British Shore Portable Dew Point Meter SADP Portable Dew Point Meter In order to obtain high-quality products or equipment to operate normally, many industries such as petrochemical, electric power, electronics, aerospace, metallurgy, textile, etc.
have more and more requirements for humidity measurement Therefore, humidity measurement has gradually become an emerging technical field.
Portable dew point meters must ensure that no airflow is generated in the room if the measurement is performed indoors, and the flow rate must be well controlled.
Automatic photoelectric portable dew point meters are for temperature control.
There is a certain delay, and it is easy to cause errors in the measurement results
.

In addition, when using the SADP portable dew point meter, the temperature should not be too fast.
This is because when the water vapor reaches a saturated state, the liquid phase still does not appear or even freezes below zero.
This phenomenon is called supercooling.
The reason for this situation is that the mirror surface and the sample gas are too clean, and there is a lack of sufficient condensation cores.
At this time, the measured dew point temperature will be lower than the actual temperature.
In this case, we can perform repeated operations to verify.
SADP portable dew point meters can be divided into four categories according to the measurement accuracy: temperature and humidity reference instruments, laboratory analysis instruments, field detection instruments, and continuous online monitoring instruments
.

SADP portable dew point meters have different requirements for their use environment and measurement data.
Customers can use temperature and humidity reference instruments mainly for high-precision measurements with intact sample gas; laboratory analysis-level instruments are mainly used for high-precision measurement, and The range is wide, and these products are mainly imported products with high prices; the on-site detection instruments are mainly portable, and the measurement accuracy is still high, but the volume is small and easy to carry; the detection accuracy of the portable dew point meter of the continuous online monitor is not high.
High, but easy to install and debug and the price is low
.

Choose according to your actual usage
.

SADP is a portable automatic dew point meter that is economical, durable and easy to operate.
The only SHAW humidity sensor ensures the high precision and long life of the SADP series dew point meter, which is unmatched by any hygrometer.
Selection of other gas humidity Accuracy of instrument: ± 3°C/ ± 4°C (± 5.
4°F/ ± 7.
2°F) Sampling condition: Sampling flow at atmospheric pressure is 5-10L/min Response time: wet-dry: -20 °C - -60 °C < 120s Dry-Wet: -100 °C - -20 °C < 20s Drying function: Auto-drying function ensures fast sensor response Power supply: Built-in battery, 9VDC battery life: more than 150 hours continuous operation Safety guarantee: intrinsically safe design, in line with NEMA7, CLASS 1, DIv.
groups, C & D standard Dimensions Weight: width 202mm, length 225mm, height 278mm, weight about 4 kg Drying function: automatic drying function to ensure that the sensor responds quickly to power supply Power supply: built-in battery, 9VDC battery life: more than 150 hours continuous operation Safety guarantee: intrinsically safe design, in line with NEMA7, CLASS 1, DIv.
groups, C & D standards 4 kg operating at normal atmospheric pressure, SADP dew point meter is clearly displayed for easy reading on the analog indicator LCD, dew point units are °C and °F