Talk about the precautions for the use of high-efficiency coating machine

High-efficiency coating machine is a kind of high-efficiency, energy-saving, safe and clean mechatronics equipment that can perform organic film coating, water-soluble film coating, slow and controlled release coating on tablets, pills, candies,
etc.

The coating machine is suitable for pharmaceutical, chemical, food and other industries
.

According to the material of the pot body, it can be divided into two types: stainless steel and copper
.

According to the heat exchange efficiency, it can be divided into two types: perforated coating machine and non-porous coating machine
.

According to the production capacity, there are two types: production type and experimental type
.

The following editor briefly introduces the precautions for the use of the high-efficiency coating machine, as follows: Each time adding liquid or removing powder, it should be distributed evenly; after each addition of liquid and distribution, it should be fully dried before adding again.
Solution, the viscosity of the solution should not be too large, otherwise it will not be easy to distribute evenly
.

In the production, the powder coating layer is often used in the slurry mixing method, that is, the powder is suspended in the binder solution and added to the rotating tablet.
This method can reduce dust and simplify the process
.

The finished product after coating must be dried at low temperature (preferably air-dried) and constantly turned; avoid exposure to the sun and high temperature drying, otherwise the pills will easily become oily and discolored
.

After the blower is turned on, it is strictly forbidden to block the blower opening with hands or other objects, so as not to damage the blower
.