-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The reactor temperature control device is widely used in petroleum, chemical, electronic instrumentation, physics, chemistry, biological engineering and other research departments, providing a field source with controlled heat and cold and uniform temperature when working for users, and conducting constant temperature experiments
on materials or products produced.
It can also be used as a heat or cold source for direct heating or refrigeration and auxiliary heating or cooling
.
1, generally used for pre-heating to make the product molding, the later stage through cooling to make the product stereotyped, will also do the pre-heating reaction for the reactor, the later cooling constant temperature, or the extrusion product pre-auxiliary heating, the later cooling to maintain a constant temperature
.
2, compared with other temperature control products, the advantage is that the control effect is stable, suitable for the initial test, pilot, simple operation, so that the on-site workers are easy to get started, good safety effect, small pressure, non-flammable and explosive, easy to install, through the client to connect the import and export pipeline, access to three-phase electricity, load the medium can be used
.
3, the use of medium is generally used according to the customer's requirements, if the high temperature does not exceed 100 degrees, and heating recommended water heating, if the temperature exceeds 100 degrees or more, the heating medium is recommended to use heat transfer oil for heating, its temperature can be used to 320 degrees, according to the process situation on site to determine
.
3, in terms of configuration, generally use indirect heat exchange, with the cooling unit part through the heat exchanger to cool the heating unit, when selecting the heat exchanger, you need to calculate the heat of the client, to prevent the heat exchange area is too small, the temperature can not be lowered
.
4, in terms of use conditions, you can use local operations, but also through communication to achieve remote control, you can control the temperature, equipment start and stop, temperature signal feedback
.
