Standard operation process of vibrating screen

Inspection before running the shale shaker: including the sanitation of the equipment, the completeness, fastening and intactness of the connecting bolts at all parts, the intactness of the vibration exciter, the damage, lack and fracture of the springs, the tension of the triangle belt, the damage of the screen box and the screen plate, the flatness, damage and looseness of the screen plate and the material sliding in and out Check whether the groove is unblocked, whether the beam is welded, whether the safety protection device is safe and reliable, whether the control box, communication and lighting are in good condition, whether the grounding protection is reliable, and whether the control button is flexible and reliable Start up: after opening the shale shaker, stand beside the control box and immediately stop the monitoring equipment in case of abnormal starting After normal start-up, check again whether the nozzle of each shale shaker is blocked or falling off, often observe the temperature and sound of the motor, often observe the sound of the vibration exciter, and often observe whether the vibration of the screen has the same amplitude of four corners and whether the triangle belt is loose or falling off, and often observe the dehydration and medium removal effect Check whether the feeding and discharging conditions of the screen are normal or not Shut down: shut down the machine after discharging the materials on the screen Observe whether the screen collides with other equipment when passing through the resonance point when stopping Stop immediately when the following conditions are found In case of endangering personal safety or equipment safety, there are many sundries in the screen area, and the blanking is not smooth, the screen mesh is broken in a large area, the chute under the screen is seriously blocked, the screen box is severely shaken and other abnormal conditions After the problem is eliminated, restart the vibrating screen.