-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
China Paint Network
News: spring climate is moderate, good for air circulation,
paint
dry faster than summer, painting duration is at least three or four days shorter, and high-quality paint adhesion than other seasons better, more elastic. Industry insiders say that there are many ways to paint, such as brushing method, brushing method, spray gun method and so on. Spring decoration, spray gun method high efficiency, speed, and paint film drying faster.
, other methods are less efficient and are particularly unsuitable for fast-drying coatings that are commonly used in spring. Spring construction, often use detergent, so that
paint
dry fast, because the spring paint absorbs moisture in the air, will produce a layer of fog, affecting the beauty of the paint film. If you do not use drying agent, you should choose a better quality paint, pay special attention to the stability of the coating, bonding strength and initial drying crack resistance, in order to prevent the slow drying speed caused by moisture mold problems. In addition, before spraying construction, the wall should be dehumidification treatment, can also be used after construction dehumidifier to dehumidification, reduce indoor air humidity. Paint construction, if the putty is not dry paint easy to cracks, the other
external wall paint
water oil ratio imbalance, etc. may cause the wall to crack. Spring wall putty is not easy to dry, it is likely that in summer and autumn when the weather drys out cracks.
want to say "good-bye" to the cracks, before the decoration must be the original grass-roots clean up the house. After the wall substrate is cleaned, first put a layer of good cloth on the wall, use the fiber's strength to ensure the integrity of the
latex paint
film, or use elastic decorative materials for the wall for the substrate treatment.