Specific operation of the Vial fully automatic capping machine for daily maintenance

Vial automatic capping machine, capping knife head is processed with steel, surface quenching treatment, durable
.

When working, the lid bottle is fixed The three-knife cyclone knife rotates the cap seal, the handle is designed as a spring structure, the distance of the three knives can be fine-tuned, the adaptability is strong, the finished product rate of the capping is high, and the motor cover is also made of stainless steel cover
.

This machine is ideal for hospitals, laboratories, and small pharmaceutical plants
.

Characteristics of the vial automatic capping machine: the working procedure is: bottle feeding, capping, capping, capping (or capping); Adopt frequency conversion speed regulation and equipped with optoelectronic automatic control system; Stacking bottles and missing bottles can automatically stop and maintain the coordination of the whole line; The lid adopts large-capacity electromagnetic oscillation bucket feeding device, the bottle cap movement is stable, the finishing effect is good, and the lid supply efficiency is high
.

The specific operation method of the vial automatic capping machine of the vial: 1, the liquid bottle is put on the bottle feeding machine, and the bottle feeder is transported to the turntable, and the turntable is positioned on the cap, at which time the tray holds the bottle upwards until the cap and the capping head are pressed
.

2.
When the cap and the cap head are pressed, the three rolling cap tips that are constantly rotating rotate several times before the cap is rolled tightly
.

3.
Push the handle forward, so that the lid of the rolled lid returns to its original position with the tray, the entire operation process is completed, and then the above operation can be repeated when each bottle cap is
rolled.

Daily maintenance of automatic capping machine: 1, because this filling machine is an automated machine, so the size of the easy to pull bottles, bottle pads, bottle caps are required to be uniform
.

2.
Before driving, you must first use the rocking handle to rotate the machine, check whether its rotation is abnormal, and really determine that it is normal before driving
.

3.
When adjusting the machine, the tool should be used appropriately, and it is strictly forbidden to use too large tools or use too much force to disassemble parts to avoid damaging the machine parts or affecting the performance of
the machine.

4.
Whenever the machine is adjusted, be sure to tighten the loose screws, and use the rocker handle to turn the machine to see if its action meets the requirements before driving
.

5, the machine must be kept clean, it is strictly forbidden to have oil, liquid or glass debris on the machine, so as not to cause damage to the
machine.